EBSD study of advanced Ti-5.7Al-3.8Mo-1.2Zr-1.3Sn alloy subjected to equal-channel angular pressing
نویسندگان
چکیده
• The lamellar component of the alloy was spheroidized after ECAP deformation. by boundary-splitting mechanism. evolution primary alpha phase is controlled continuous recrystallization. Burgers orientation relationship between α and β phases found. In this work, electron backscatter diffraction (EBSD) applied for microstructural characterization advanced Ti-5.7Al-3.8Mo-1.2Zr-1.3Sn subjected to equalchannel angular pressing (ECAP). It found that spheroidization process induced governed conventional nearly-Burgers a- b-phases revealed. This intriguing result can be attributed very high cooperation in slip activity phases.
منابع مشابه
Re-strengthening in AA6063 Alloy During Equal Channel Angular Pressing
Equal channel angular pressing (ECAP) is carried out using two different configurations for the exit channel of the ECAP die, i.e., relieved and choked, with angles of 0.2 °. It is found that using a die with relieved exit channel, the sample was extruded for 6 passes with no surface cracks and an average cell size of 727 nm and a fraction of high angle grain boundaries of 54 % were achieved. M...
متن کاملPlastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing
Grain refinement improves the mechanical properties and formability of metals and alloys. So far, several different grain refinement methods have been proposed and studied. Severe plastic deformation is one of the most promising and efficient methods. Therefore, in the present study the possibility of imposing a two-step severe plastic deformation (Extrusion and Equal channel angular pressing) ...
متن کاملSize effect in equal channel angular pressing (ECAP) process
The influence of the sample size (diameter while keeping the length constant) in equal channel angular pressing (ECAP) of pure aluminum is examined using finite element method (FEM) and experiment. Different sized aluminum rods were processed via ECAP and the effect of sample size on the strain homogeneity, process load, and the ratio of the friction to the total force were evaluated. The resul...
متن کاملAn EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion
The microstructural evolution of interstitial-free (IF) steel subjected to Φ = 90° Equal Channel Angular Extrusion (ECAE) for up to 4 passes via routes A, BA, C and up to 8 passes via routes BC was studied using Electron Back-Scatter Diffraction (EBSD). Routes BC and BA recorded the smallest grain size and aspect ratios and the largest average misorientation and area fraction of high-angle grai...
متن کامل3D finite element study of temperature variations during equal channel angular pressing
Equal channel angular pressing is the most promising method of severe plastic deformation with the capability of producing ultrafine grained materials. These materials exhibit improved mechanical and physical properties compared with their coarse grained counter parts.The temperature variation in the sample during ECA-pressing is a key factor determining the final microstructure and mechanical ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Letters
سال: 2021
ISSN: ['1873-4979', '0167-577X']
DOI: https://doi.org/10.1016/j.matlet.2021.130003