EBSD Microstructural Analysis of WC-AISI 304 Cemented Carbides with Carbon Addition
نویسندگان
چکیده
منابع مشابه
Focused Ion Beam tomography of WC-Co cemented carbides
The microstructure of three different grades of WC-Co cemented carbides has been reconstructed in three dimensions after sequential images obtained by focused ion beam. The three-dimensional microstructual parameters are compared against the well-know two-dimensional parameters of grain size, phase percentages and mean free path. Results show good agreement with the exception of individual grai...
متن کاملFRACTURE AND FATIGUE BEHAVIOR OF WC-Co AND WC-CoNi CEMENTED CARBIDES
The fracture and fatigue characteristics of several cemented carbide grades are investigated as a function of their microstructure. In doing so, the influence of binder chemical nature and content (Co and 76wt%Co-24wt%Ni), as well as carbide grain size on hardness, flexural strength, fracture toughness and fatigue crack growth (FCG) behavior is evaluated. Mechanical testing is combined with a d...
متن کاملOptimized production route of WC powder pre-alloyed with Ta for fine grained cemented carbides
Article history: Received 30 March 2016 Received in revised form 13 May 2016 Accepted 22 May 2016 Available online 24 May 2016 Powders of hexagonal (W,Ta)Cwere produced following a two-step carburization processwith (W,Ta)2C powder as an intermediate product. XRD measurements indicate that higher temperatures during the first carburization step increase the fraction of Ta in the (W,Ta)2C struct...
متن کاملMechanical strength of ground WC-Co cemented carbides after coating deposition
Manufacturing of hardmetal tools often involves surface grinding, ion etching and final coating. Each stage throughout the manufacturing chain introduces surface integrity changes which may be critical for defining the final mechanical behavior of the coated tools. Within this context, an experimental test program has been developed to assess the influence of a coating (TiN) deposition on surfa...
متن کاملWear Characterization of Cemented Carbides (WC–CoNi) Processed by Laser Surface Texturing under Abrasive Machining Conditions
Cemented carbides are outstanding engineering materials widely used in quite demanding material removal applications. In this study, laser surface texturing is implemented for enhancing, at the surface level, the intrinsic bulk-like tribological performance of these materials. In this regard, hexagonal pyramids patterned on the cutting surface of a tungsten cemented carbide grade (WC–CoNi) have...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2016
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927616000362