Easy Method of Patient Positioning for Convergent-Beam Cardiac SPECT
نویسندگان
چکیده
منابع مشابه
Easy method of patient positioning for convergent-beam cardiac SPECT.
UNLABELLED The use of convergent-beam SPECT can increase detection sensitivity; however, the projection data are likely to be truncated if the patient is not properly positioned. This article describes a patient-positioning method that has been adopted in our hospital for cardiac SPECT scans when convergent-beam collimators are used. METHODS The system that we use has 3 detector heads and a p...
متن کاملSimulation and patient studies of scatter correction in cardiac SPECT imaging
Introduction: Myocardial perfusion imaging is a nuclear medicine imaging method that is used to detect coronary artery diseases. One of the main sources of error in this imaging method is the detection of Compton scattered photons in the photopeak energy window used for data acquisition. This results in the degradation of the image contrast, and therefore decreases the...
متن کاملDevelopment of an automatic evaluation method for patient positioning error
Highly accurate radiotherapy needs highly accurate patient positioning. At our facility, patient positioning is manually performed by radiology technicians. After the positioning, positioning error is measured by manually comparing some positions on a digital radiography image (DR) to the corresponding positions on a digitally reconstructed radiography image (DRR). This method is prone to error...
متن کاملConvergent beam electron diffraction
In convergent-beam electron diffraction (CBED) a highly convergent electron beam is focussed on to a small (~< 50 nm) area of the sample. Instead of the diffraction spots that are obtained in the back focal plane of the objective lens with parallel illumination in conventional selected-area electron diffraction, CBED produces discs of intensity. The point group can be determined uniquely from t...
متن کاملPinhole SPECT vs. Cone-Beam SPECT
In single photon emission computed tomography (SPECT), pinhole and cone-beam collimators are used for small object imaging. It is accepted that a pinhole collimator should be used if the object is very small, and the cone-beam collimator should be used if the object is larger. This paper presents criteria to determine which collimation geometry is more advantageous in terms of spatial resolutio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Nuclear Medicine Technology
سال: 2007
ISSN: 0091-4916
DOI: 10.2967/jnmt.107.041160