Dynamic similarity design method for an aero-engine dualrotor test rig

Development of a Test-rig for a Modern Motorcycle Engine

This paper presents experimental activities that have been performed in the Automotive Engineering Centre laboratories in Universiti Malaysia Pahang for developing a test-rig based on a modern motorcycle engine. The experimental engine test-rig was developed based on an eddy current dynamometer which was coupled to a four-stroke singlecylinder SI motorcycle engine. Moreover, the test-rig consis...

Preliminary results on multi-body dynamic simulation of a new test rig for wheel-rail contact

The ability to perform rolling contact fatigue (RCF) experiments in wheel–rail material is provided by a new small–scale test rig, manifesting the actual dynamic behaviour of the railway system. In this paper, a multi-body dynamics (MBD) model is proposed, simulating the vibration behaviour of the prescribed rig. The new testing facility is modelled using a three-dimensional model of the vehicl...

Future Aero Engine Designs: An Evolving Vision

Preliminary results on dynamic analysis of a new test rig for wheel-rail contact studies

A new reduced–scale test rig is developed owing to significantly contribute to the applicability of the laboratory tests on rolling contact fatigue (RCF) in wheel-rail material. This paper introduces the dynamic analysis of the test rig, in order to assess the vibration behaviour of the system with respect to contact phenomenon. Finite element modelling (FEM) is used to simulate the mecha...

A Rapid Method to Achieve Aero-Engine Blade Form Detection

This paper proposes a rapid method to detect aero-engine blade form, according to the characteristics of an aero-engine blade surface. This method first deduces an inclination error model in free-form surface measurements based on the non-contact laser triangulation principle. Then a four-coordinate measuring system was independently developed, a special fixture was designed according to the bl...