Dynamic Precipitation in a Binary Mg-Al Alloy During Equal Channel Angular Extrusion (ECAE)
نویسندگان
چکیده
منابع مشابه
Numerical Analysis of Az61 Magnesium Alloy Extrusion Process by Modified Equal Channel Angular Extrusion (ecae) Method
T. Bajor, M. Krakowiak, P. Szota, Czestochowa University of Technology, Czestochowa, Poland The paper presents the results of numerical modelling of AZ61 magnesium alloy hot deformation using modified ECAE method. The temperature-velocity conditions were analysed using FEM. The extrusion process was realised using the die with modified angular channel containing horizontal contracting zone in t...
متن کاملRe-strengthening in AA6063 Alloy During Equal Channel Angular Pressing
Equal channel angular pressing (ECAP) is carried out using two different configurations for the exit channel of the ECAP die, i.e., relieved and choked, with angles of 0.2 °. It is found that using a die with relieved exit channel, the sample was extruded for 6 passes with no surface cracks and an average cell size of 727 nm and a fraction of high angle grain boundaries of 54 % were achieved. M...
متن کاملinvestigating the effects of expansion equal channel angular extrusion (exp-ecae) on the dynamic behavior of aa7075 aluminum alloy
expansion equal channel angular extrusion (exp-ecae) is a severe plastic deformation (spd) operation for processing bulk materials. in the current study, aa7075 al was spd-processed by expansion equal channel angular extrusion (ex-ecae) at various temperatures and ram velocities. then, using split hopkinson pressure bar (shpb), the severely deformed products were compressed at room temperature ...
متن کاملQuasi-Static and Dynamic Characterization of Equal Channel Angular Extrusion (ECAE) –Processed and Rolled AZ31 Magnesium Alloy Sheet
متن کامل
Wear Behavior and Microstructure of Mg-Sn Alloy Processed by Equal Channel Angular Extrusion
Mg-5wt.% Sn alloy is often used in portable electronic devices and automobiles. In this study, mechanical properties of Mg-5wt.% Sn alloy processed by Equal Channel Angular Extrusion (ECAE) were characterized. More precisely, its hardness and wear behavior were measured using Vickers hardness test and a pin-on-disc wear test. The microstructures of ECAE-processed Mg-Sn alloys were investigated ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2018
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927618011595