Dynamic polygonization in 9%Cr heat resistant steel
نویسندگان
چکیده
منابع مشابه
Laves-phase evolution during aging in 9Cr-1.8W-0.5Mo-VNb steel for USC power plants
Laves-phase precipitation and coarsening of tungsten strengthened 9% Cr steel under thermal aging at 923K up to 8000 h was reported in this paper, where the information of the evolution of mean particle size, the number density, the volume fraction of Laves-phase precipitates and the partition coefficients of W and Mo in the matrix over the aging time were determined. The change of hardness ove...
متن کاملAnalyzing the characteristics of the cavity nucleation, growth and coalescence mechanism of 9Cr-1Mo-VNb steel (P91) steel
Creep damage is one of the serious problems for the high temperature industries and computational approach (such as continuum damage mechanics) has been developed and used, complementary to the experimental approach, to assist safe operation. However, there are no ready creep damage constitutive equations to be used for predicting the lifetime for this type of alloy, particularly for low stress...
متن کاملEffect of aging temperature on structural evolution of HP-Nb heat resistant steel
In this study, the changes in microstructure of HP-Nb cast heat resistant steel after 8 years of service at high temperatures were investigated. Study of microstructure using optical microscopy (OM) and scanning electron microscopy (SEM) equipped with an energy dispersive spectrometry (EDS) showed that the microstructure of this steel in as-cast condition includes an austenitic matrix, and that...
متن کاملCreep and Fatigue Interaction Behavior in Sanicro 25 Heat Resistant Austenitic Stainless Steel
Sanicro 25 is a newly developed advanced high strength heat resistant austenitic stainless steel. The material shows good resistance to steam oxidation and flue gas corrosion, and has higher creep rupture strength than other austenitic stainless steels available today. It is thus an excellent candidate for superheaters and reheaters for advanced ultra-super critical power plants with efficiency...
متن کاملPrecipitation behavior in a nitride-strengthened martensitic heat resistant steel during hot deformation
The stress relaxation curves for three different hot deformation processes in the temperature range of 750-1000 °C were studied to develop an understanding of the precipitation behavior in a nitride-strengthened martensitic heat resistant steel (Zhang et al., Mater. Sci. Eng. A, 2015) [1]. This data article provides supporting data and detailed information on how to accurately analysis the stre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2010
ISSN: 1742-6596
DOI: 10.1088/1742-6596/240/1/012070