Dynamic Modeling of Bucket-Soil Interactions Using Koopman-DFL Lifting Linearization for Model Predictive Contouring Control of Autonomous Excavators

نویسندگان

چکیده

A lifting-linearization method based on the Koopman operator and Dual Faceted Linearization is applied to control of a robotic excavator. In excavation, bucket interacts with surrounding soil in highly nonlinear complex manner. Here, we propose represent bucket-soil dynamics set linear state equations higher-dimensional space. The space independent variables augmented by adding associated elements involved dynamics. These include resistive forces moment acting from soil, effective inertia that varies as captured into bucket. Variables these are treated additional variables, their time evolution represented another differential equations. lifted dynamic model then Model Predictive Contouring Control, where cost functional minimized convex optimization problem thanks tuned data-driven using simulator. Simulation experiments homogeneous verify effectiveness proposed lifting linearization compared its counterpart.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

the use of appropriate madm model for ranking the vendors of mci equipments using fuzzy approach

abstract nowadays, the science of decision making has been paid to more attention due to the complexity of the problems of suppliers selection. as known, one of the efficient tools in economic and human resources development is the extension of communication networks in developing countries. so, the proper selection of suppliers of tc equipments is of concern very much. in this study, a ...

15 صفحه اول

Multi-axis model predictive contouring control

Contouring systems involve competing control objectives of maximising accuracy while minimising traversal time. A previously developed model predictive contouring controller for biaxial systems is extended to multi-axis systems subject to joint acceleration and jerk constraints. This requires consideration of manipulator forward kinematics and both position and orientation of the end effector. ...

متن کامل

Autonomous Helicopter Formation using Model Predictive Control

Formation flight is the primary movement technique for teams of helicopters. However, the potential for accidents is greatly increased when helicopter teams are required to fly in tight formations and under harsh conditions. The starting point for safe autonomous flight formations is to design a distributed control law attenuating external disturbances coming into a formation, so that each vehi...

متن کامل

diagnostic and developmental potentials of dynamic assessment for writing skill

این پایان نامه بدنبال بررسی کاربرد ارزیابی مستمر در یک محیط یادگیری زبان دوم از طریق طرح چهار سوال تحقیق زیر بود: (1) درک توانایی های فراگیران زمانیکه که از طریق برآورد عملکرد مستقل آنها امکان پذیر نباشد اما در طول جلسات ارزیابی مستمر مشخص شوند; (2) امکان تقویت توانایی های فراگیران از طریق ارزیابی مستمر; (3) سودمندی ارزیابی مستمر در هدایت آموزش فردی به سمتی که به منطقه ی تقریبی رشد افراد حساس ا...

15 صفحه اول

investigating the feasibility of a proposed model for geometric design of deployable arch structures

deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: IEEE robotics and automation letters

سال: 2022

ISSN: ['2377-3766']

DOI: https://doi.org/10.1109/lra.2021.3121136