Dynamic Fracture Toughness and Its Measurement

Interfacial Fracture Toughness Measurement and Improvement for Composite/metal Interfaces

Adhesive bonding is enlarging its application range as a practical method for the joining of dissimilar materials in automotives, aircrafts, microelectronics and medical devices industries replacing conventional joining techniques such as welding, bolting and riveting [1-5]. Especially for joining of fiber-reinforced polymer (FRP) composites to other structural materials such as metal, traditio...

Comparison of three real time techniques for the measurement of dynamic fracture initiation toughness in metals

Three techniques for measuring dynamic stress intensity factor time histories of dynamically loaded stationary modeI cracks are compared as applied to dynamically loaded pre-cracked 6Al–4V titanium alloy specimens. The three techniques are crack opening displacement (COD), dynamic strain gage measurement, and coherent gradient sensing (CGS). The stress intensity factor histories are inferred fr...

Fracture toughness of graphene.

Perfect graphene is believed to be the strongest material. However, the useful strength of large-area graphene with engineering relevance is usually determined by its fracture toughness, rather than the intrinsic strength that governs a uniform breaking of atomic bonds in perfect graphene. To date, the fracture toughness of graphene has not been measured. Here we report an in situ tensile testi...

Fracture toughness measurement of dental ceramics using the indentation fracture method with different formulas.

This study examined fracture toughness (KIC) measurements obtained using the indentation fracture (IF) method with a view to improving their reliability. The KIC values of five dental ceramics were measured using the IF method with five different formulas, and the single-edge precracked beam (SEPB) method was used as a control. The elastic moduli of the dental ceramics were evaluated by dynamic...

Fracture Toughness of Metal Castings