Dynamic fracture instability of tough bulk metallic glass
نویسندگان
چکیده
منابع مشابه
Fractal in fracture of bulk metallic glass
We investigate the nanoscale periodic corrugation (NPC) structures on the dynamic fracture surface of a typical tough bulk metallic glass, submitted to high-velocity plate impact and scanned by atomic force microscopy (AFM). The detrended fluctuation analysis (DFA) of the recorded AFM profiles reveals that the valley landscapes of the NPC are nearly memoryless, characterized by Hurst parameter ...
متن کاملMechanical performance and fracture behavior of Fe41Co7Cr15Mo14Y2C15B6 bulk metallic glass
The mechanical properties of a new Fe41Co7Cr15Mo14Y2C15B6 bulk glassy alloy were studied by impact bending, compression, and hardness tests carried out at room temperature. The compressive fracture strength, elastic strain to fracture, Young’s modulus and Vickers hardness were measured to be 3.5 GPa, 1.5%, 265 GPa, and 1253 kg mm, respectively. The fracture mode of the glassy alloy under uniaxi...
متن کاملFracture Toughness Study on Bulk Metallic Glasses and Novel Joining Method Using Bulk Metallic Glass Solder
The fracture toughness of three new compositional variants of the Zr-Ti-Be-LTM (Late Transition Metal) family of bulk metallic glasses (BMG’s) are studied in the as-cast and annealed condition. Quaternary Zr-Ti-Cu-Be alloys consistently had linear elastic fracture toughness values greater than 80 MPa·m, while Vitreloy 1, a Zr-Ti-Cu-Ni-Be alloy, had an average fracture toughness of 48.5 MPa·m wi...
متن کاملFracture Toughness Determination for a Be:ryllium-bearing Bulk Metallic Glass
A class of beryllium-bearing bulk metallic glass alloys has recently been developed at the California Institute of Technology (1). These alloys can be fabricated in the form of large ingots with minimum dimensions on the order of centimeters, which allows valid mechanical tests to be performed on these materials. Such tests were not formerly possible given the small dimensions of earlier metall...
متن کاملEffect of Loading Rate on Dynamic Fracture Morphology of a Zr-Based Bulk Metallic Glass
Low-velocity plate impact experiments using a single-stage gas-gun are performed on Zr58.5Cu15.6Ni12.8Al10.3Nb2.8. Compressive fracture surfaces of the samples subjected to varying impact velocities and stress amplitudes are evaluated in order to study their loading rate dependence. Samples impacted at increasing loading rates, from increasing velocities of impact, show a larger extent of local...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2008
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.2913206