DUCTILITY CONTROL METHOD FOR STEEL MOMENT FRAME WITH TUNED DYNAMIC MASS SYSTEMS
نویسندگان
چکیده
منابع مشابه
Failure Modes and Flexural Ductility of Steel Moment Connections
1 Associate Research Fellow,Center for Research on Earthquake Engineering (NCREE), Chinese Taiwan 2 Professor, Dept. of Civil Engineering, Taiwan University, Taipei, Chinese Taiwan 3 Assistant Professor, Dept. of Civil and Environmental Engineering, University of Kaohsiung, Kaohsiung, Chinese Taiwan Email: [email protected] ABSTRACT : Ductility is the main attribute of steel moment connections...
متن کاملASSESSMENT OF DUCTILITY REDUCTION FACTOR FOR OPTIMUM SEISMIC DESIGNED STEEL MOMENT-RESISTING FRAMES
In the present study, ten steel-moment resisting frames (SMRFs) having different numbers of stories ranging from 3 to 20 stories and fundamental periods of vibration ranging from 0.3 to 3.0 second were optimized subjected to a set of earthquake ground motions using the concept of uniform damage distribution along the height of the structures. Based on the step-by-step optimization algorithm dev...
متن کاملA Retrofitting Framework for Pre-Northridge Steel Moment-Frame Buildings
A case study of retrofitting a 20-story pre-Northridge steel moment-frame building is presented. Twelve retrofit 4 schemes are developed with varying degrees of intervention. Three retrofitting techniques are considered: up5 grading the brittle beam-to-column moment resisting connections, and implementing either conventional or 6 buckling-restrained brace elements within the existing moment-fra...
متن کاملOPTIMIZATION OF STEEL MOMENT FRAME BY A PROPOSED EVOLUTIONARY ALGORITHM
This paper presents an improved multi-objective evolutionary algorithm (IMOEA) for the design of planar steel frames. By considering constraints as a new objective function, single objective optimization problems turned to multi objective optimization problems. To increase efficiency of IMOEA different Crossover and Mutation are employed. Also to avoid local optima dynamic interference of mutat...
متن کاملEstimation of Hysteretic Damping in Steel Dual Systems with Buckling Restrained Brace and Moment Resisting Frame
Abstract—Nowadays, energy dissipation devices are commonly used in structures. High rate of energy absorption during earthquakes is the benefit of using such devices, which results in damage reduction of structural elements, specifically columns. The hysteretic damping capacity of energy dissipation devices is the key point that it may adversely make analysis and design process complicated. Thi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2012
ISSN: 1881-8153,1340-4202
DOI: 10.3130/aijs.77.187