Ductile woven silk fibre thermoplastic composites with quasi-isotropic strength
نویسندگان
چکیده
The combination of ductile Bombyx Mori silk fibre with thermoplastic matrices, combined the use a woven architecture, leads to composites quasi-isotropic strength. Bending and tensile properties were determined for (0,90)s twill weave composites, different polymers as reference epoxy resin. Thermoplastic are isotropic in strength (about 135 MPa at 50% volume fraction) due high elongation failure both matrix allowing extensive shearing fabric when loaded 45° direction. A good quality interface has clear positive influence on mechanical especially bending yield
منابع مشابه
Accelerated Strength Testing of Thermoplastic Composites
Constant ramp strength tests on unidirectional thermoplastic composite specimens oriented in the 90° direction were conducted at constant temperatures ranging from 149°C to 232°C. Ramp rates spanning 5 orders of magnitude were tested so that failures occurred in the range from 0.5 sec. to 24 hrs. (0.5 to 100,000 MPa/sec). Below 204°C, time-temperature superposition held allowing strength at lon...
متن کاملImproved Strength and Toughness of Carbon Woven Fabric Composites with Functionalized MWCNTs
This investigation examines the role of carboxyl functionalized multi-walled carbon nanotubes (COOH-MWCNTs) in the on- and off-axis flexure and the shear responses of thin carbon woven fabric composite plates. The chemically functionalized COOH-MWCNTs were used to fabricate epoxy nanocomposites and, subsequently, carbon woven fabric plates to be tested on flexure and shear. In addition to the n...
متن کاملShear Strength Characteristics in Aged Polyester-glass Fibre Composites
Researches on the effects produced by the sun light upon polymeric matrix composites have been increased on the last ten years. It is commonly to find literature about mechanical characteristics degradation due to different environment effects. But a few ones are related to the shear behaviour. Moreover a limited studies are related to glass fibre polyester, even that are the composites most co...
متن کاملoptimization of the manufacturing process of natural fibre thermoplastic composites in order to minimize warpage
in this study, the effective factors on warpage in short fibre reinforced thermoplastic composites has been studied. first of all, the effective factors in manufacturing process were detected and then in order to decrease the number of experiments, the approach of design of experiments has been applied. by using micromechanics theory in composites and coefficients of thermal expansion models, a...
متن کاملChallenges in Biomass–Thermoplastic Composites
Wood and other biomass resources have been blended with thermoplastic such as polyethylene, polypropylene, polylactic acid and polyvinyl chloride to form wood plastic composites (WPC). WPCs have seen a large growth in the United States in recent years mainly in the residential decking market with the removal of CCA treated wood decking from residential markets. While there are many successes to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part A-applied Science and Manufacturing
سال: 2021
ISSN: ['1359-835X', '1878-5840']
DOI: https://doi.org/10.1016/j.compositesa.2021.106442