Ductile steel fibre composites with brittle and ductile matrices
نویسندگان
چکیده
منابع مشابه
Engineering ductile fracture in brittle-matrix composites
This letter describes a newly discovered phenomenon: ductile fracture in cementitious materials. The brittle nature of materials such as concrete and ceramics has prompted the development of various approaches to enhance their fracture toughness. Fibre reinforcement has been the common focus in the toughening of the brittle materials. Two types of fracture have been observed to date in cementit...
متن کاملEffect of Constraint on Ductile Crack Growth and Ductile-Brittle Fracture Transition of a carbon Steel
Ductile-brittle fracture transition was investigated using compact tension (CT) specimens from -70 o C to 40 o C for a carbon steel. Large deformation finite element analysis has been carried out to simulate the stable crack growth in the compact tension (CT, a/W=0.6), three point-point bend (SE(B), a/W=0.1) and centre-cracked tension (M(T), a/W=0.5) specimens. Experimental crack tip opening di...
متن کاملFatigue-Crack Propagation Behavior of Ductile/Brittle Laminated Composites
A study has been made of the fatigue-crack propagation properties of a series of laminated Nbreinforced Nb3Al intermetallic-matrix composites with varying microstructural scale but nominally identical reinforcement volume fraction (20 pct Nb). It was found that resistance to fatigue-crack growth improved with increasing metallic layer thickness (in the range 50 to 250 mm) both in the crack-divi...
متن کاملDuctile or Partial Ductile Mode Machining of Brittle Materials
This paper reports ductile or partial ductile mode machining of silicon, glass and some advanced ceramics. Results are presented using scanning electron micrographs of the machined surfaces. Grinding and lapping operations using inexpensive machine tools could produce ductile streaks on surfaces of these brittle materials under good conditions. Manufacture of spherical glass lenses by the fract...
متن کاملNumerical Modeling of the Ductile-Brittle Transition
Numerical studies of the ductile-brittle transition are described that are based on incorporating physically based models of the competing fracture mechanisms into the material's constitutive relation. An elastic-viscoplastic constitutive relation for a porous plastic solid is used to model ductile fracture by the nucleation and subsequent growth of voids to coalescence. Cleavage is modeled in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part A: Applied Science and Manufacturing
سال: 2014
ISSN: 1359-835X
DOI: 10.1016/j.compositesa.2014.02.006