Ductile and brittle transition behavior of titanium alloys in ultra-precision machining
نویسندگان
چکیده
منابع مشابه
Comparison of Ductile-to-Brittle Transition Behavior in Two Similar Ferritic Oxide Dispersion Strengthened Alloys
The ductile-to-brittle transition (DBT) behavior of two similar Fe-Cr-Al oxide dispersion strengthened (ODS) stainless steels was analyzed following the Cottrell-Petch model. Both alloys were manufactured by mechanical alloying (MA) but by different forming routes. One was manufactured as hot rolled tube, and the other in the form of hot extruded bar. The two hot forming routes considered do no...
متن کاملDuctile or Partial Ductile Mode Machining of Brittle Materials
This paper reports ductile or partial ductile mode machining of silicon, glass and some advanced ceramics. Results are presented using scanning electron micrographs of the machined surfaces. Grinding and lapping operations using inexpensive machine tools could produce ductile streaks on surfaces of these brittle materials under good conditions. Manufacture of spherical glass lenses by the fract...
متن کاملNumerical Modeling of the Ductile-Brittle Transition
Numerical studies of the ductile-brittle transition are described that are based on incorporating physically based models of the competing fracture mechanisms into the material's constitutive relation. An elastic-viscoplastic constitutive relation for a porous plastic solid is used to model ductile fracture by the nucleation and subsequent growth of voids to coalescence. Cleavage is modeled in ...
متن کاملRotations of brittle particles during plastic deformation of ductile alloys
Experimental evidence is presented to show that significant rotations of brittle phase inclusions of a Fe-rich intermetallic phase occur during plastic deformation on an Al Mg Si base wrought aluminum alloy. The particle rotations are quantitatively characterized, for uniaxial tension, compression, torsion, and notch-tension test specimens strained to different strain levels. The particle rotat...
متن کاملA Study of Mechanics in Brittle–Ductile Cutting Mode Transition
This paper presents an investigation of the mechanism of the brittle–ductile cutting mode transition from the perspective of the mechanics. A mechanistic model is proposed to analyze the relationship between undeformed chip thickness, deformation, and stress levels in the elastic stage of the periodic chip formation process, regarding whether brittle or ductile mode deformation is to follow the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scientific Reports
سال: 2018
ISSN: 2045-2322
DOI: 10.1038/s41598-018-22329-2