Dual‐functional ZnO/LiF layer protected lithium metal for stable Li <sub>10</sub> GeP <sub>2</sub> S <sub>12</sub> ‐based all‐solid‐state lithium batteries
نویسندگان
چکیده
All-solid-state lithium battery has become one of the most promising secondary batteries due to their high energy density and excellent safety. However, growth dendrites side reactions between metal solid electrolytes hinder practical application all-solid-state batteries. Herein, a dual-functional layer ZnO LiF is fabricated at interface Li10GeP2S12 electrolyte by magnetic sputtering technique. The ZnO/LiF can suppress severe Li10GeP2S12/lithium against which block dendrites. symmetric cell [email protected]/LiF-Li10GeP2S12[email protected]/LiF demonstrates stable plating/striping cycling for 2000 h with small overpotential 200 mV 0.1 mA cm−2 mAh cm−2. full protected]/LiF-Li10GeP2S12-LiCoO2@LiNbO3 shows stability 500 cycles reversible specific capacity 80 g−1 1.0 C.
منابع مشابه
Ionic Liquid Electrolytes for Li–Air Batteries: Lithium Metal Cycling
In this work, the electrochemical stability and lithium plating/stripping performance of N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (Pyr14TFSI) are reported, by investigating the behavior of Li metal electrodes in symmetrical Li/electrolyte/Li cells. Electrochemical impedance spectroscopy measurements and galvanostatic cycling at different temperatures are performed to ana...
متن کاملMetal hydrides for lithium-ion batteries.
Classical electrodes for Li-ion technology operate via an insertion/de-insertion process. Recently, conversion electrodes have shown the capability of greater capacity, but have so far suffered from a marked hysteresis in voltage between charge and discharge, leading to poor energy efficiency and voltages. Here, we present the electrochemical reactivity of MgH(2) with Li that constitutes the fi...
متن کاملA Search for the Optimum Lithium Rich Layered Metal Oxide Cathode Material for Li-Ion Batteries
We report the results of a comprehensive study of the relationship between electrochemical performance in Li cells and chemical composition of a series of Li rich layered metal oxides of the general formula xLi2MnO3 · (1-x)LiMn0.33Ni0.33Co0.33O2 in which x = 0,1, 0.2, 0,3, 0.5 or 0.7, synthesized using the same method. In order to identify the cathode material having the optimum Li cell perform...
متن کاملStrong texturing of lithium metal in batteries.
Lithium, with its high theoretical specific capacity and lowest electrochemical potential, has been recognized as the ultimate negative electrode material for next-generation lithium-based high-energy-density batteries. However, a key challenge that has yet to be overcome is the inferior reversibility of Li plating and stripping, typically thought to be related to the uncontrollable morphology ...
متن کاملA stable Li-deficient oxide as high-performance cathode for advanced lithium-ion batteries.
Monodisperse Li-deficient Li(0.35)Ni(0.2)Co(0.1)Mn(0.7)O(2-x) spinel single crystals have been prepared for the first time. The Li-deficient oxide surprisingly delivers large reversible capacity (251.3 mA h g(-1)), outstanding cycle life and low median-voltage of 2.7 V in the range of 2.0-4.9 V. Importantly, high median-voltage (4.4 V) and superior rate capability are also obtained from 3.0 to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Battery energy
سال: 2022
ISSN: ['2768-1696', '2768-1688']
DOI: https://doi.org/10.1002/bte2.20220051