Dual-cure Photo-thermal Initiating System for Cationic Polymerization of Epoxy under LED Visible Light
نویسندگان
چکیده
منابع مشابه
LED Modulation Characteristics in a Visible-Light Communication System
This paper conducts a research on modulation characteristics of blue light-emitting diodes (LEDs) used in a visible-light communication (VLC) system. Through analysis of the modulation characteristics of LEDs with different emitting sizes, we find that there is a similar linear relationship between LED’s 3dB bandwidth and the operation current density. This experiment also shows that high serie...
متن کاملThermal Rheological Analysis of Cure Process of Epoxy Prepreg
The cure process of epoxy prepreg used as composite pipe joints was studied by means of differential scanning calorimetry (DSC), Bohlin Rheometer and other techniques. Isothermal DSC measurements were conducted between 110 and 220 C, at 10 C intervals. The results show that the complete cure reaction could be achieved at 220 C. The isothermal cure process was simulated with the four-parameter a...
متن کاملSynthesis of nanocomposite based on Semnan natural zeolite for photocatalytic degradation of tetracycline under visible light
This study investigated the photocatalytic behaviors for the nanocomposite of TiO2 P25 and Semnan natural zeolite in the decomposition of tetracycline under visible light in an aqueous solution. The structural features of the composite were investigated by a series of complementary techniques that included X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), scanning elec...
متن کاملVisible-Light Initiated Free-Radical/Cationic Ring-Opening Hybrid Photopolymerization of Methacrylate/Epoxy: Polymerization Kinetics, Crosslinking Structure, and Dynamic Mechanical Properties.
The effects of polymerization kinetics and chemical miscibility on the crosslinking structure and mechanical properties of polymers cured by visible-light initiated free-radical/cationic ring-opening hybrid photopolymerization are determined. A three-component initiator system is used and the monomer system contains methacrylates and epoxides. The photopolymerization kinetics is monitored in si...
متن کاملDual-polarity plasmonic metalens for visible light
Surface topography and refractive index profile dictate the deterministic functionality of a lens. The polarity of most lenses reported so far, that is, either positive (convex) or negative (concave), depends on the curvatures of the interfaces. Here we experimentally demonstrate a counter-intuitive dual-polarity flat lens based on helicity-dependent phase discontinuities for circularly polariz...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 2017
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.30.399