Dual-axial Ultrasonic Assisted Wire-EDM Process with Vibration Exerted through the Upper Guide
نویسندگان
چکیده
منابع مشابه
FEM Modeling of Ultrasonic Vibration Assisted work-piece in EDM Process
In Electrical Discharge Machining, oxides (or debris) are created and accumulated in the sparking gap between an electrode and a work piece. If the debris density becomes too great in certain points in the gap, there is a reduction in the resistance, which encourages the formation of abnormal discharges, results in significant electrode damage and slows down the material removal rate. To enhanc...
متن کاملComparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes
In this investigation, the material removal rate, tool wear rate and surface integrity obtained by EDM, ultrasonic vibrations assisted EDM and magnetic field assisted EDM were studied and compared with together to show the quality of the effects of applying each of ultrasonic vibrations to tool and magnetic field around gap distance of EDM process on material removal rate, tool wear rate, and s...
متن کاملModeling and Optimization of Wire EDM Process
The present work is aimed to optimize the parameters of (WEDM) process by considering the effect of input parameters viz. Time On, Time Off, Wire Speed & Wire Feed. Experiments have been conducted with these parameters in three different levels data related to process responses viz. Metal removal rate, surface roughness (Ra) have been measured for each of the experimental run. These data have b...
متن کاملExplanation of the training process through the axial process model
Abstract: Background and Objective: Patient’s education is one of the standards of the quality of care and a factor affecting the cost, recovery and treatment of the patient. Considering the importance of patient’s education in hospitals, the present study aimed at designing the patient’s instruction model in a hospital through process-based model. Materials and Methods: The present study wa...
متن کاملUltrasonic Vibration Assisted Electro-Discharge Machining
An ultrasonic vibration has been superposed on the normal electrode movement to increase the flushing effect during a micro electro-discharge machining (EDM) process. A systematic study on the effects of ultrasonic vibration on the EDM performance for fabricating microholes in Nitinol has been completed. The introduction of ultrasonic vibration to the microEDM process has more than 60 times inc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2020
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.02.262