Dry slide wear behavior of 601AC/B4C Selective layered functionally graded material with particulate Ni-P coating
نویسندگان
چکیده
منابع مشابه
Fabrication and Characterization of Nanostructure Functionally Graded Ni-P Electroless Coating
In this research, novel functionally graded Ni-P coating was deposited with electroless process. The content of phosphorus was controlled to change gradual through the thickness of the coating. During the plating, bath temperature and pH were changed at specified intervals to obtain functionally graded structure. To compare the properties of functionally graded coating with Ni-P single-layer co...
متن کاملFracture Testing of a Layered Functionally Graded Material
1 Assistant Professor, Department of Mechanical and Aeronautical Engineering; Graduate student, Professor and Professor, respectively, Department of Chemical Engineering and Materials Science, University of California, One Shields Avenue, Davis, CA 95616. 2 Assistant Professor, Department of Civil and Environmental Engineering, University of Illinois, Urbana IL 61801-2352. Abstract: This paper ...
متن کاملThe effect of TiO2 concentration on microstructure, corrosion behavior and wear behavior of Ni-P-W-TiO2 coating
Nickel-phosphorus coatings (Ni-P) are widely used in industry due to their high hardness, corrosion resistance and very good mechanical and chemical properties. Oxide particles such as TiO2 can be used to increase the wear resistance of these coatings. In this study, the Ni-P-W-TiO2 composite coating was deposited on the AISI 304L steel substrate using the electroplating method. Electroplating ...
متن کاملR-curve and strength behavior of a functionally graded material
The effects of loading conditions, specimen size and metal particle size on the crack growth resistance curve (R-curve) and residual strength of a ceramic-metal functionally graded material (FGM) are studied based on the crack-bridging concept. It is found that the FGM exhibits strong R-curve behavior when a crack grows from the ceramic-rich region toward the metal-rich region and the residual ...
متن کاملFabrication of functionally graded Ni-Al2O3 nanocomposite coating and evaluation of its properties
In this study, functionally graded Ni-Al2O3 composite coating (FGN-A) has been produced from nickel Watt’s bath containing different concentrations of Al2O3 particles. For this, different composite coatings were electroplated in the same bath with different particles concentration to find the optimum concentration of particles in which the maximum content with uniform distribution of Al2O3 part...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Express
سال: 2020
ISSN: 2053-1591
DOI: 10.1088/2053-1591/ab6897