Dry redox reforming hybrid power cycle: Performance analysis and comparison to steam redox reforming

Stepwise methane steam reforming: a route to CO-free hydrogen

A method for the production of clean hydrogen is demonstrated. The process consists of two steps involving the decomposition of methane to CO-free hydrogen and surface carbon in the first step followed by steam gasification of this surface carbon in the second step. This process can be operated in cycles and could be an excellent hydrogen source for fuel cells and other devices or processes req...

One-step hydrocarbons steam reforming and CO2 capture

1. Introduction Already in 1868 [1], H 2 was produced by the steam reforming (eq.1) of hydrocarbons in the presence of a calcium oxide, and the use of natural calcium-based sorbents as candidates to remove CO 2 in situ from reactors has been receiving increasing attention. Through simultaneous CO 2 absorption (eq.3) the equilibrium of the homogenous water gas shift reaction (eq.2) is shifted to...

CFD modeling and control of a steam methane reforming reactor

This work initially focuses on developing a computational fluid dynamics (CFD) model of an industrialscale steam methane reforming reactor (reforming tube) used to produce hydrogen. Subsequently, we design and evaluate three different feedback control schemes to drive the area-weighted average hydrogen mole fraction measured at the reforming tube outlet ( x̄H outlet 2 ) to a desired set-point va...

Performance Evaluation of Cu-SiO2 Aerogel Catalyst in Methanol Steam Reforming

Dry Reforming of Methane Using Cold Plasma; Kinetic Model Study

In this work, the dry reforming of methane was studied using a corona and gliding discharge plasma microreactors. A chemical kinetic model was developed to describe the experimental behavior observed. The kinetic model is proposed based on the assumption that the reactant molecules CH4 or CO2 are attacked by active species produced b...