Dry powder alkali-activated slag cements

Investigation on the effect of slag and limestone powder addition in alkali activated metakaolin

Alkali activated material has recently attracted great attention as an environmentally friendly building material. Generally, it exhibits higher mechanical properties and better durability when compared with Portland cement based materials. In this article, mixed alkali activated systems consisting of N-A-S-H and C-A-S-H hydrated gels were produced, using metakaolin as a dominated starting mate...

PROPERTIES OF ALKALI-ACTIVATED FLY ASH CONCRETE BLENDED WITH SLAG

SELF-Cured Alkali Activated Slag Concrete Mixes- An Experimental Study

Alkali Activated Slag Concrete (AASC) mixes are manufactured by activating ground granulated blast furnace slag (GGBFS) using sodium hydroxide and sodium silicate solutions. The aim of the present experimental research was to investigate the effect of increasing the dosages of sodium oxide (Na2O, in the range of 4 to 8%) and the activator modulus (Ms) (i.e. the SiO2/Na2O ratio, in the range of ...

The Interfacial Transition Zone in Alkali-Activated Slag Mortars

The interfacial transition zone (ITZ) is known to strongly influence the mechanical and transport properties of mortars and concretes. This paper studies the ITZ between siliceous (quartz) aggregates and alkali-activated slag (AAS) binders in the context of mortar specimens. Backscattered electron (BSE) images generated in an environmental scanning electron microscope (ESEM) are used to identif...

Slag Hydration in composite cements

Despite reported synergies between alumina rich supplementary cementitious materials (SCMs) and limestone, previous studies have focused on up to 5% limestone content. Slag hydration in the presence of 10% limestone is reported in this paper. Hydration was followed through chemical shrinkage, calorimetry, thermal analysis, electron microscopy and X-ray powder diffraction. The results show that ...