Dry-grinded ultrafine cements hydration. physicochemical and microstructural characterization
نویسندگان
چکیده
منابع مشابه
Slag Hydration in composite cements
Despite reported synergies between alumina rich supplementary cementitious materials (SCMs) and limestone, previous studies have focused on up to 5% limestone content. Slag hydration in the presence of 10% limestone is reported in this paper. Hydration was followed through chemical shrinkage, calorimetry, thermal analysis, electron microscopy and X-ray powder diffraction. The results show that ...
متن کاملSEM/EDX characterization of the hydration products of belite cements from class C coal fly ash
This paper presents the microscopic characterization of two types of fly ash belite cements and their hydration products by means of scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) microanalysis and X-ray diffraction analysis. The cements were obtained from ASTM class C coal fly ash by the hydrothermal-calcination route in water (FABC-2-W) and NaOH 1M solution (FABC-2-N). The ...
متن کاملMicrostructural aspects of cement hydration – ultrasonic waves and numerical simulation
In this paper, an ultrasonic shear wave reflection method was adopted to mimic the microstructural evolution of hydrating Portland cement pastes with different water/cement-ratios (0.35, 0.5 and 0.6) cured under a constant temperature of 25°C. The reflection coefficient measured with this technique was correlated to microstructural parameters of the cement pastes. The application of numerical s...
متن کاملThe Impact of Inoculation Rate and Order on Physicochemical, Microstructural and Sensory Attributes of Probiotic Doogh
Effects of inoculation level (4 or 8-fold compared to standard inoculation) and order (standard inoculation before fermentation and 3-fold inoculation at the end of fermentation = 1+3, Two-fold inoculation before fermentation and the same at the end of fermentation = 2+2, 2+6, 4-fold before fermentation = 4, 4+4, and 8) of culture inoculums containing probiotics on viscosity, phase separation,...
متن کاملMicrostructural Characterization of Carburized Steels
*Member of ASM International arburizing has been a popular method for obtaining a unique balance of properties in steels for many years. Steels with low carbon contents are characterized by good toughness and good ductility, but low strength and low wear resistance. By locally increasing the carbon content at the surface, followed by heat treatment to produce a very high hardness in this layer ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2013
ISSN: 1980-5373,1516-1439
DOI: 10.1590/s1516-14392013005000014