Dry Broaching Using Carbon Free Steel as Tool Material
نویسندگان
چکیده
منابع مشابه
Optimization of Broaching Tool Design
Broaching is a very common manufacturing process for the machining of internal or external complex shapes into parts. Due to the process geometry, broaching tool is the most critical parameter of the broaching process. Therefore, optimal design of the tools is needed in order to improve the productivity of the process. In this paper, a methodology is presented for optimal design of the broachin...
متن کاملElectrochemical and Dry Sand Impact Erosion Studies on Carbon Steel
This study investigated the dry and aqueous erosion of mild steel using electrochemical and dry sand impact techniques. In dry sand impact experiments, mild steel was eroded with 45 μm and 150 μm sand particles. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and micro-hardness techniques were used to elaborate the surface morphology of the eroded samples. The res...
متن کاملEffect of Cutting Parameters on Tool Wear, Surface Roughness and Material Removal Rate During Dry Turning of EN-31 Steel
ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...
متن کاملUsing Recyclable Steel Material in Tall Buildings
Recycling steel building components is key to the sustainability of a structure’s end-of-life, as it is the most economical solution. In this paper the effects of usage of recycled steel material in tall buildings aspects are investigated. Keywords—Building, recycled material, steel, structure.
متن کاملSimultaneous Measurement of Material Properties and Thickness of Carbon Steel Plates Using Pulsed Eddy Currents
OF CARBON STEEL PLATES USING PULSED EDDY CURRENTS V.O. de Haan and P. de Jong 1 BonPhysics Research and Investigations BV, Putterhoek, The Netherlands; 2 Röntgen Technische Dienst bv, Rotterdam, The Netherlands Abstract: It is well know from literature that Pulsed Eddy Currents generated by switching off a stationary current through a coil above a carbon steel plate can be used to measure the t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2016
ISSN: 2212-8271
DOI: 10.1016/j.procir.2016.04.076