Droplet breakup in airflow with strong shear effect

Droplet Breakup in High-Speed Gas Flows

Numerical simulations are performed to study the breakup of water cylinders in the flow behind normal shocks. The computational setup is similar to previous experiments (Igra and Takayama, 2001, 2003). We examine the qualitative features of the so-called stripping breakup observed in the numerical results. Two interesting flow features are discussed: the existence of recirculation regions and a...

Droplet Breakup in Expansion-contraction Microchannels

We investigate the influences of expansion-contraction microchannels on droplet breakup in capillary microfluidic devices. With variations in channel dimension, local shear stresses at the injection nozzle and focusing orifice vary, significantly impacting flow behavior including droplet breakup locations and breakup modes. We observe transition of droplet breakup location from focusing orifice...

Effect of inertia on drop breakup under shear

A spherical drop, placed in a second liquid of the same density and viscosity, is subjected to shear between parallel walls. The subsequent flow is investigated numerically with a volume-of-fluid continuous-surface-force algorithm. Inertially driven breakup is examined. The critical Reynolds numbers are examined for capillary numbers in the range where the drop does not break up in Stokes flow....

Reduction of Parasitic Currents in Simulation of Droplet Secondary Breakup with Density Ratio Higher than 60 by InterDyMFoam

Bubble breakup in a turbulent shear layer

The breakup of a millimetre size buoyantly rising bubble encountering a horizontal plane turbulent jet is experimentally investigated using high-speed shadowgraphy and acoustic techniques. The bubble diameter to jet height ratio is 0.75 and the jet height based Reynolds number is 4000. The high-speed imaging was recorded at 7 kHz simultaneous with hydrophone output at 100 kHz. Bubble breakup ev...