Drop Impact Analysis of Cushioning System with an Elastic Critical Component of Cantilever Beam Type
نویسندگان
چکیده
منابع مشابه
Nonlinear Vibration Analysis of a cantilever beam with nonlinear geometry
Analyzing the nonlinear vibration of beams is one of the important issues in structural engineering. According to this, an impressive analytical method which is called Modified Iteration Perturbation Method (MIPM) is used to obtain the behavior and frequency of a cantilever beam with geometric nonlinear. This new method is combined by the Mickens and Iteration methods. Moreover, this method don...
متن کاملElastic Stress Analysis of Composite Cantilever Beam Loaded Uniformly
In this investigation an elastic stress analysis is carried out a woven steel fiber reinforced thermoplastic cantilever beam loaded uniformly at the upper surface. The composite beam material consists of low density polyethylene as a thermoplastic (LDFE, f.2.12) and woven steel fibers. Granules of the polyethylene are put into the moulds and they are heated up to 160°C by using electrical resis...
متن کاملcritical discourse analysis of two political speeches in light of bakhtins dialogism
چکیده گفتگوگری باختین نظریه ای است که به تفاوت ها احترام گذاشته و گفتگو را ارج می نهد. رشته های مختلف علوم انسانی همواره از این نظریه بهره جسته اند. با وجود این تنها مطالعات اندکی در زمینه تجزیه و تحلیل نقادانه کلام به نظریه گفتگوگری پرداخته اند. پنداشت تحقیق حاضر بر آن است که احترام به حقوق دیگران از طریق فراهم آوردن شرایط یکسان برای بیان نظریات مختلف یکی از مهمترین مشترکات تحلیل انتقادی گفتم...
15 صفحه اولan infinite planar array of rectangular microstrip patch antenna analysis
the methods which are used to analyze microstrip antennas, are divited into three categories: empirical methods, semi-empirical methods and full-wave analysis. empirical and semi-empirical methods are generally based on some fundamental simplifying assumptions about quality of surface current distribution and substrate thickness. thses simplificatioms cause low accuracy in field evaluation. ful...
15 صفحه اولModeling and modal analysis to oscillations of IPMC cantilever beam and simulating as an actuator
The purpose of this article is modal analysis of ionic polymer metal composite beams, then briefing the system to the unique parameters to help in up modeling of the actuator. In this paper at first using of Mathematical analysis and Closed form transfer function of cantilever beam dynamic response to the forces of different inputs (intensive and continuous) is calculated and for different type...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical Problems in Engineering
سال: 2013
ISSN: 1024-123X,1563-5147
DOI: 10.1155/2013/379068