Driveline Torsional Analysis and Clutch Damper Optimization for Reducing Gear Rattle
نویسندگان
چکیده
منابع مشابه
Driveline modeling and estimation of individual clutch torque during gear shifts for dual clutch transmission
The purpose of the proposed work centers on the unprecedented task of accurately estimating the torque transmitted through each clutch of the dual clutch transmission. This is to possibly improve the clutch control performance during vehicle launch and gearshifts and to elongate the clutch life. Such goal is attained by only using the measurements and data that are already available in current ...
متن کاملVibration Control of MR Damper Landing Gear
In the field of Automation, Fuzzy Control Fuzzy control has significant merits which are utilized in intelligent controllers, especially for vibration control systems. This paper is concerned with the application aspects of the developed MR damper for landing gear system, to attenuate the sustained vibrations during the landing phase. Also a comparative study is made on the responses obtained f...
متن کاملDriveline Modeling and Principles for Speed Control and Gear-Shift Control
i Abstract A vehicular driveline consists of engine, clutch, transmission, shafts, and wheels, which are controlled by a driveline management system. Experiments and modeling using a heavy truck show that there are significant torsional resonances in the driveline. A linear model with a drive shaft flexibility is able to sufficiently explain the measured engine speed and wheel speed. Engine con...
متن کاملAnalysis of gear rattle by means of a wavelet-based signal processing procedure
In the paper a wavelet-based signals processing technique for the experimental detection of the gear rattle produced by the teeth impacts in lightly loaded gears is proposed. The Discrete Wavelet Transform is used to decompose the signal of the angular relative motion of an helical gear pair, and the wavelet decomposition details are adopted to analyze the dynamic behavior under rattle conditio...
متن کاملGear Optimization
In this study, an optimization methodology is presented to systematically define head-cutter geometry and machine tool settings to introduce optimal tooth modifications in spiral bevel and hypoid gears. The goal of the optimization is to simultaneously minimize the tooth contact pressure and the angular displacement error of the driven gear (the transmission error), to maximize the elastohydrod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shock and Vibration
سال: 2016
ISSN: 1070-9622,1875-9203
DOI: 10.1155/2016/8434625