Drawing Textures in Commercial Pure Titanium Wire
نویسندگان
چکیده
منابع مشابه
Niobium-Titanium Superconducting Wires: Nanostructures by Extrusion and Wire Drawing
Nano-fabrication is not new to the manufacturers of superconducting wires, in fact the dominant commercial superconductor, Nb-Ti, relies on a mechanically induced nano-structure for its remarkable properties. In this paper we show how these wires are manufactured so that their microstructure achieves the same scale as the superconducting vortex spacing. Recent attention on superconductors has e...
متن کاملLawd – Laser Assisted Wire Drawing
In conventional wire drawing the diameter of a wire or rod-like workpiece is reduced by drawing it through a conical die. Dieless drawing of a wire or a rod is realized by a localized heating of the work piece. As heat source for example an induction coil can be used. Immediately after having passed the heating zone the work piece is cooled to restrict the heat input on very small region. By ap...
متن کاملDeflection test evaluation of different lots of the same nickel-titanium wire commercial brand.
INTRODUCTION The aim of this in vitro study was to compare the elastic properties of the load-deflection ratio of orthodontic wires of different lot numbers and the same commercial brand. METHODS A total of 40 nickel-titanium (NiTi) wire segments (Morelli Ortodontia™--Sorocaba, SP, Brazil), 0.016-in in diameter were used. Groups were sorted according to lot numbers (lots 1, 2, 3 and 4). 28-mm...
متن کاملEffects of Cryo-Treatment on Corrosion Behavior and Mechanical Properties of Laser-Welded Commercial Pure Titanium
The objective of this study was to investigate the effects of cryo-treatment on the microstructure, corrosion behavior, and mechanical properties of Ti before and after laser welding. The microstructure was studied by optical microscopy. It was found that the grain size for Ti became smaller after cryo-treatment. Cryo-treatment could also refine and stabilize the crystal lattice structure and d...
متن کاملEffect of the TLP process parameters on microstructure, mechanical properties and corrosion resistance of 316L stainless steel to pure commercial titanium joint with pure copper interface
In this research, effect of time and temperature of TLP process on the microstructure, mechanical properties and corrosion resistance of CP-Ti to 316L stainless steel joint evaluated. For this purpose pure copper foil with 100 µm thickness was used as interlayer and joining process carried out at 950˚C, 1000˚C and 1050˚C and for 90, 120 and 150 minutes. After the joining process, shear and micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1954
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.18.4_201