Drawing bate effects on morphological parameters in nylon-6 PET, and PBT filaments

Crystalline and Amorphous Orientation of Polypropylene / Nylon 6 Blend Filaments

N6) made with or without PP-g-MAH as compatibilizer are investigated. The blend filaments produced at the take-up speeds of 300 and 800 m/min were drawn with draw ratio of 3.5 and 2, respectively. Effects of blending of N6 with PP on birefringence , crystalline, and amorphous orientation factors of the composite filaments are studied. The amorphous orientation factor, fam of PP was found to inc...

A Study on the Kinetic and Thermodynamic Parameters of Different Acid Dyes on Nylon 6 Fibers

Investigation of the Effects of Pressure Path and Tool Parameters in Hydrodynamic Deep Drawing

In recent years, hydroforming process has been applied in different industries such as aerospace, automotive and military industries due to its advantages, such as high dimensional accuracy, capability of forming complicated parts and high drawing ratio. Hydrodynamic deep drawing with radial pressure is one type of hydroforming process. In this paper, forming of cylindrical cups in hydrodynamic...

Effect of Experimental Parameters on the Morphology of Electrospun Nylon 6 fibres

Electrospinning is a unique way to producing novel polymer nano fibres with diameter typically in the range from 10 nm to 1500nm. Large length to diameter ratio and small mass to volume ratio of these nanosizes fibres widens the areas of their application to many industrial uses. Nylon 6 nanofibres with diameter ranging from 150nm to 1300 nm were produced by the electrospinning process. The fib...

Modification of Nylon 6 , 6 1

Nylon 6, 6 is regarded as tough and ductile materials since it exhibit high tensile elongation to break and high drop weight impact strengths. However, under conditions of stress concentration such as in the presence of sharp notches or cracks, polyamides exhibit brittle failure. This property, evaluated as notched Izod or Charpy impact tests, indicates that unmodified polyamides exhibit relati...