Double-electrode arc welding process: Principle, variants, control and developments
نویسندگان
چکیده
منابع مشابه
Metal Transfer in Double-Electrode Gas Metal Arc Welding
Gas metal arc welding (GMAW) is the most widely used process for metal joining because of its high productivity and good quality, but analysis shows that the fundamental characteristic restricts conventional GMAW from further increasing the welding productivity. A novel GMAW process, refereed to as double-electrode GMAW or DE-GMAW, thus has been developed to make it possible to increase the mel...
متن کاملKeyhole Double-sided Arc Welding Process for Deep Narrow Penetration
In regular arc welding, the arc heat is transferred from the surface of the workpiece to melt it. In keyhole plasma arc welding, the workpiece is melted by the plasma jet which heats the wall of the keyhole along the thickness direction. Penetration is achieved with reduced heat input. However, the plasma jet only gains its energy in the arc before reaching the keyhole. In the keyhole where no ...
متن کاملModeling and control of quasi-keyhole arc welding process
Quasi-keyhole is a novel approach proposed to operate the keyhole arc welding process. Because the method’s effectiveness depends on the amperage of the peak current used to establish the keyhole, this paper proposes adjusting the amperage based on the duration of the peak current, which equals the keyhole establishment time. A nominal model structure has been selected from those identified usi...
متن کاملModelling of Electrode-arc Coupling in Electric Arc Welding
Modelling of the arc in electric arc welding is significant to achieve a better process understanding, thus gain better weld quality and a more efficient production process. It requires knowing the conditions at the surfaces of the anode and cathode. These conditions are very difficult to set from measurements and should be calculated. This requires modelling the complex physics of the electrod...
متن کاملModeling and Control of Keyhole Arc Welding Process
This paper addresses the development of an adaptive control system for keyhole arc welding process. The system developed adjusts the amperage of the peak current to achieve the desired peak current period under varying manufacturing conditions. A nominal model is selected from models identified using experimental data and is used as the a prior model of the controlled process. A predictive cont...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Manufacturing Processes
سال: 2014
ISSN: 1526-6125
DOI: 10.1016/j.jmapro.2013.08.003