Distributions and Leaching Behaviors of Toxic Elements in Fly Ash

Permeability and Leaching Characteristics of Fly Ash Liner Materials

Rigid-wall column tests are performed at a hydraulic gradient of 100 on 21 compacted mixture contai.ning a Class F fly ash, sand, benton.ite, and cement. Results indicate that combina1ions of the admixtures can lower the permeability of the fly ash by up to an order of magnitude. There appears to be an optimum percentage of fly ash that minimizes the permeability of fly ashsand mixtures. Specim...

Evaluation of Fly Ash Leachabillty Using Batch Leaching Procedures

Suppressing Heavy Metal Leaching through Ball Milling of Fly Ash

Ball milling is investigated as a method of reducing the leaching concentration (often termed stablilization) of heavy metals in municipal solid waste incineration (MSWI) fly ash. Three heavy metals (Cu, Cr, Pb) loose much of their solubility in leachate by treating fly ash in a planetary ball mill, in which collisions between balls and fly ash drive various physical processes, as well as chemi...

Leaching Characteristics of Fluoride from Coal Fly Ash

Leaching of fluoride from fly ash has been studied at different ash/water ratios and temperatures and also over a broad range of pH. The efficiency of leaching was only slightly dependent on the ash/water ratio, thus revealing a solubilitycontrolled mechanism of the process. The efficiency was also independent of the temperature over the range 20 90°C.

Fly Ash Derived Zeolites in the Removal of Toxic Compounds

The present paper describes the previous obtained results concerning purification of gases, water and sewages from toxic components such as mercury, radionuclides and petroleum substances. The tested materials constitute synthetic zeolites obtained in hydrothermal reaction, i.e., Na-X, Na-P1, and natural zeolite clinoptilolite. The zeolites (Na-X, Na-P1 and clinoptilolite) needed for mercury ca...