Distortion-Corrected Integral Imaging 3D Display System Based on Lens Array Holographic Optical Element
نویسندگان
چکیده
We propose a distortion-corrected integral imaging (II) 3D display system based on lens array holographic optical element (LAHOE). The LAHOE is used as projection screen. beam of the parallel light. Hence, consists spatial light modulator, reverse lens, relay element, and telecentric lens. acquired data reconstructed image II are symmetrically related to each other. Therefore, there distortion in system. To avoid affecting viewing experience viewers, elemental (EIA) projected obliquely LAHOE, causing lateral EIA. There position deviation system, so EIA has geometric deformation. Due EIA, it difficult precisely align which results serious flip images. affects asymmetry reconstruction. Lens can be solved by compensation method. Lateral deformation perspective transformations computer graphics. After correction, undistorted projected, little distortion. In process reconstruction, causes reconstruction analyzed, issues that generate these asymmetric factors addressed. Experimental indicate better effect achieved.
منابع مشابه
Full-color lens-array holographic optical element for three-dimensional optical see-through augmented reality.
A novel system of optical see-through augmented reality (AR) is proposed by making use of a holographic optical element (HOE) with full-color and lens-array functions. The full-color lens-array HOE provides see-through property with three-dimensional (3D) virtual images, for it functions as a conventional lens array only for Bragg-matched lights. An HOE recording setup was built, and it recorde...
متن کامل3D augmented reality with integral imaging display
In this paper, a three-dimensional (3D) integral imaging display for augmented reality is presented. By implementing the pseudoscopic-to-orthoscopic conversion method, elemental image arrays with different capturing parameters can be transferred into the identical format for 3D display. With the proposed merging algorithm, a new set of elemental images for augmented reality display is generated...
متن کاملOptical Modeling of a Holographic Single Element Head-mounted Display
This paper proposes a new method to design an optically-fabricated holographic element, where the construction optical system and the playback system can be optimized jointly. The method was driven by the use of a new holographic recording material – the photo-thermo-refractive (PTR) glass that can only be written at 325nm, while its playback takes place in the visible part of the spectrum. App...
متن کاملSensor-fingerprint based identification of images corrected for lens distortion
Computational photography is quickly making its way from research labs to the market. Recently, camera manufacturers started using in-camera lens-distortion correction of the captured image to give users more powerful range of zoom in compact and affordable cameras. Since the distortion correction (barrel/pincushion) depends on the zoom, it desynchronizes the pixel-to-pixel correspondence betwe...
متن کاملFabrication of New 3D Phantom for the measurement of Geometric Distortion in Magnetic Resonance Imaging System
Introduction: Geometric distortion, an important parameter in neurology and oncology. The current study aimed to design and construct a new three-dimensional (3D) phantom using a 3D printer in order to measure geometric distortion and its 3D reproducibility. Material and Methods: In this study, a new phantom ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Symmetry
سال: 2022
ISSN: ['0865-4824', '2226-1877']
DOI: https://doi.org/10.3390/sym14071481