Distinction of Conductive PbO<sub>2</sub> and Non-conductive PbSO<sub>4</sub> in Deposited Mixtures on IrO<sub>2</sub>-Ta<sub>2</sub>O<sub>5</sub>/Ti Anodes Using SEM with Low Accelerated Incident Electrons
نویسندگان
چکیده
منابع مشابه
Tin nanoparticles as an effective conductive additive in silicon anodes
We have found that the addition of tin nanoparticles to a silicon-based anode provides dramatic improvements in performance in terms of both charge capacity and cycling stability. Using a simple procedure and off-the-shelf additives and precursors, we developed a structure in which the tin nanoparticles are segregated at the interface between the silicon-containing active layer and the solid el...
متن کاملHighly conductive p-type nanocrystalline silicon films deposited by RF-PECVD using silane and trimethylboron mixtures at high pressure
In this paper we present a study of boron-doped nc-Si:H films prepared by PECVD at high deposition pressure ( 4 mbar), high plasma power and low substrate temperature ( 200 C) using trimethylboron (TMB) as a dopant gas. The influence of deposition parameters on electrical, structural and optical properties is investigated. We determine the deposition conditions that lead to the formation of p-t...
متن کاملIdentification of Conductive and Non-conductive Elements in Two-dimensional Electrical Impedance Tomography Using Finite Element Method
In this paper by using two-dimensional Electrical Impedance Tomography we have tried to distinguish the element under supervision on the basis of conductivity. A prototype of such system has been constructed with 16 electrode circular phantom. Once the set up is ready, we have tested it twice with an oval shaped object of different conductivity. In first study, we have considered that the objec...
متن کاملMulti-layer Embedment of Conductive and Non-conductive Pdms for All-elastomer Mems
PDMS (polydimethylsiloxane) elastomer is widely used in MEMS. However, PDMS is non-conductive and as a result is used in mostly structural applications. We report methods for monolithic integration of conductive and non-conductive PDMS for realizing wholly polymer-based devices with embedded elastomer wires, electrodes, heaters, and sensors. In this work we demonstrate elastomer strain gauges, ...
متن کاملon the equivalence of constructed-response and multiple-choice : stem-equivalent, stem non-equivalent but content equivalent, and stem and content non-equivalent items in reading comprehension using multifaceted rasch
the present study investigated construct equivalence of multiple choice (mc) and constructed response (cr) item types across stem and content equivalent mc and cr items (item type ‘a’), non-stem-equivalent but content equivalent mc and cr items (item type ‘b’), and non-stem and non-content equivalent mc and cr items (item type ‘c’). one hundred seventy english-major undergraduates completed mc ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2015
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.66.673