Dissolution of alpha-prime precipitates in thermally embrittled S2205-duplex steels during reversion-heat treatment
نویسندگان
چکیده
منابع مشابه
Application of Polymeric Quenchants in Heat Treatment of Steels
Aqueous polymer quenchants are being used increasingly in steel heat treatment industries as a substitution for conventional quenchants. By adjusting the quench parameters of the polymeric media, it is possible to achieve desirable microstructure and mechanical properties in addition to reduction in distortion and cracking. In this work, Polyalkylene Glycol (PAG) aqueous solution was used as th...
متن کاملSuper Plasticity of /α Duplex Stainless Steels
In this paper the studies of the two-phase super Plasticity stainless steels is studied. The aim of this study obtained the suitable criteria to thermo-mechanical treatment condition for decrease the microstructure (grain size) and super plasticity property in two-phase stainless steels. Also here we want to show the appropriate ranges of temperature and strain rate used in the process super pl...
متن کاملapplication of polymeric quenchants in heat treatment of steels
aqueous polymer quenchants are being used increasingly in steel heat treatment industries as a substitution for conventional quenchants. by adjusting the quench parameters of the polymeric media, it is possible to achieve desirable microstructure and mechanical properties in addition to reduction in distortion and cracking. in this work, polyalkylene glycol (pag) aqueous solution was used as th...
متن کاملDuplex Hardening of Steels for Aeroengine Bearings
Duplex hardening is a process in which conventional heat-treatments such as secondary or case hardening are followed up by surface nitriding to achieve exceptional properties, particularly in the context of aeroengine bearings. Hardness values in excess of 1 000 HV can in principle be achieved, and although the hardness decreases as a function of depth below the surface, some level of enhanceme...
متن کاملInfluence of microalloying precipitates on Bauschinger effect during UOE forming of line pipe steels
Large diameter steel line pipes are generally produced by cold deforming hot rolled or thermomechanically controlled rolled (TMCR) plate by the three-stage 'UOE' process. Pipe strength has been found to increase or decrease relative to the plate, depending on the steel grade and plate processing history. The strength increase is due to work hardening whereas any decrease in strength arises from...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Results in Physics
سال: 2015
ISSN: 2211-3797
DOI: 10.1016/j.rinp.2015.10.004