Dissimilar Materials Bonding Using Epoxy Monolith
نویسندگان
چکیده
منابع مشابه
Earthquake slip between dissimilar poroelastic materials
[1] A mismatch of elastic properties across a fault induces normal stress changes during spatially nonuniform in-plane slip. Recently, Rudnicki and Rice showed that similar effects follow from a mismatch of poroelastic properties (e.g., permeability) within fluid-saturated fringes of damaged material along the fault walls; in this case, it is pore pressure on the slip plane and hence effective ...
متن کاملMicro-Study of Dissimilar Welded Materials
The dissimilar joint between aluminum/titanium alloys (Al 6082 and Ti G2) were successfully achieved by CO2 laser welding with a single pass and without filler material using the overlap joint design. Laser welding parameters ranges combinations were experimentally determined using Taguchi approach with the objective of producing welded joint with acceptable welding profile and high quality of ...
متن کاملCatalytic ozonation of metolachlor under continuous operation using nanocarbon materials grown on a ceramic monolith.
The catalytic ozonation of the herbicide metolachlor (MTLC) was tested using carbon nanomaterials as catalysts. Multiwalled carbon nanotubes were used in semi-batch experiments and carbon nanofibres grown on a honeycomb cordierite monolith were tested in continuous experiments. The application of the carbon catalyst was shown to improve the mineralization degree of MTLC and to decrease the toxi...
متن کاملAdhesive Bonding of Wood Materials
Adhesion to Wood 9–1 Surface Properties of Wood Adherends 9–2 Extractives on Surfaces 9–3 Knifeand Abrasive-Planed Surfaces 9–3 Veneer Surfaces 9–4 Surfaces of Wood and Nonwood Composite Products 9–5 Physical Properties of Wood Adherends 9–6 Density and Porosity 9–6 Moisture Content and Dimensional Changes 9–7 Adhesives 9–9 Composition 9–9 Health and Safety 9–10 Strength and Durability 9–10 Adh...
متن کاملEpoxy resins for bonding orthodontic attachments to teeth.
S umm ary An epoxy resin formulation has been developed to bond orthodontic attachments to enamel sur faces. The disruptive force required to break the bond under experimental conditions was in excess of the forces exerted on the orthodontic attach ments during treatment. This formulation has been subjected to a limited number of clinical trials. These tend to substantiate the experimental fi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ACS Omega
سال: 2018
ISSN: 2470-1343,2470-1343
DOI: 10.1021/acsomega.8b00920