Dissimilar joining for multi-materials structures
نویسندگان
چکیده
منابع مشابه
Ceramic/metal joining for structures and materials
The paper presents a discussion of the various types of ceramic joining within a conceptual framework based on the fundamentals of wetting, adhesion, and the thermodynamics of interfacial reactions. Examples are given of solid state diffusion bonding of Pt to alumina and brazing of AlN. Most ceramic-metal bonding is conducted at high temperatures, where chemical reaction is to be expected. The ...
متن کاملCombustion joining of refractory materials
This paper overviews heterogeneous exothermic reactive systems as they apply to the joining of materials. Techniques that are investigated fall under two general schemes: so-called Volume Combustion Synthesis (VCS) and Self-Propagating High-Temperature Synthesis (SHS). Within the VCS scheme, applications that are considered include Reactive Joining (RJ), Reactive Resistance Welding (RRW), and S...
متن کاملEarthquake slip between dissimilar poroelastic materials
[1] A mismatch of elastic properties across a fault induces normal stress changes during spatially nonuniform in-plane slip. Recently, Rudnicki and Rice showed that similar effects follow from a mismatch of poroelastic properties (e.g., permeability) within fluid-saturated fringes of damaged material along the fault walls; in this case, it is pore pressure on the slip plane and hence effective ...
متن کاملMicro-Study of Dissimilar Welded Materials
The dissimilar joint between aluminum/titanium alloys (Al 6082 and Ti G2) were successfully achieved by CO2 laser welding with a single pass and without filler material using the overlap joint design. Laser welding parameters ranges combinations were experimentally determined using Taguchi approach with the objective of producing welded joint with acceptable welding profile and high quality of ...
متن کاملControl of Welding Residual Stress for Dissimilar Laser Welded Materials
The most common problem of welding dissimilar metals (DMWs) with respect to residual stresses is the differences in the coefficient of thermal expansion and heat conductivity of the two welded metals. In the present work, a CO2 continuous laser welding process was successfully applied and optimized for joining a dissimilar AISI 316 stainless steel and low carbon steel plates. The Taguchi approa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 2021
ISSN: ['0451-5994', '1880-8018']
DOI: https://doi.org/10.2464/jilm.71.188