Disproportionate collapse analysis of mid-rise cross-laminated timber buildings

Assessing Cross Laminated Timber (CLT) as an Alternative Material for Mid-Rise Residential Buildings in Cold Regions in China—A Life-Cycle Assessment Approach

Timber building has gained more and more attention worldwide due to it being a generic renewable material and having low environmental impact. It is widely accepted that the use of timber may be able to reduce the embodied energy of a building. However, the development of timber buildings in China is not as rapid as in some other countries. This may be because of the limitations of building reg...

progressive collapse evaluation of rc symmetric and asymmetric mid-rise and tall buildings under earthquake loads

plan irregularity causes local damages being concentrated in the irregular buildings. progressive collapse is also the collapse of a large portion or whole building due to the local damages in the structure. the effect of irregularity on the progressive collapse potential of the buildings is investigated in this study. this is carried out by progressive collapse evaluation of the asymmetric mid...

Cross Laminated Timber Construction for Resisting Lateral Loads on Six Level Buildings

The author’s intention is to contribute to the general discussion on timber multi-level commercial buildings. Interest in this topic is expected due to the environmental advantages of timber construction when compared to concrete and steel. This paper looks into three timber based systems for resisting lateral loads for buildings to six storeys, that will ensure relatively ‘open’ floor spaces. ...

Ambient vibration tests of a cross-laminated timber building

Performance of Mid-rise Buildings with Tubular Structure Under the Effect of Near Field Earthquakes

The aim objective of this study is to investigate the effects of near-field earthquakes on the response of mid-rise buildings with tubular structure.  For this purpose, a 20-story building with a square plan of six by six bays, all with 6 m span, and story height of 3.70 m is considered.  Axial force of columns, shear lag, and inter-story drift values are used as the main response parameters. N...