Disposable Non-Enzymatic Glucose Sensors Using Screen-Printed Nickel/Carbon Composites on Indium Tin Oxide Electrodes
نویسندگان
چکیده
منابع مشابه
Disposable Non-Enzymatic Glucose Sensors Using Screen-Printed Nickel/Carbon Composites on Indium Tin Oxide Electrodes
Disposable screen-printed nickel/carbon composites on indium tin oxide (ITO) electrodes (DSPNCE) were developed for the detection of glucose without enzymes. The DSPNCE were prepared by screen-printing the ITO substrate with a 50 wt% nickel/carbon composite, followed by curing at 400 °C for 30 min. The redox couple of Ni(OH)₂/NiOOH was deposited on the surface of the electrodes via cyclic volta...
متن کاملOptoelectric biosensor using indium-tin-oxide electrodes.
The use of an optically thin indium-tin-oxide (ITO) electrode is presented for an optoelectric biosensor simultaneously recording optical images and microimpedance to examine time-dependent cellular growth. The transmittance of a 100 nm thick ITO electrode layer is approximately the same as the transmittance of a clean glass substrate, whereas the industry-standard Au(47.5 nm)/Ti(2.5 nm) electr...
متن کاملPatterning cells on optically transparent indium tin oxide electrodes.
The ability to exercise precise spatial and temporal control over cell-surface interactions is an important prerequisite to the assembly of multi-cellular constructs serving as in vitro mimics of native tissues. In this study, photolithography and wet etching techniques were used to fabricate individually addressable indium tin oxide (ITO) electrodes on glass substrates. The glass substrates co...
متن کاملIndex-matched indium tin oxide electrodes for capacitive touch screen panel applications.
Index-matched indium tin oxide (ITO) electrodes for capacitive touch screen panels have been fabricated to improve optical transmittance and reduce the difference of reflectance (deltaR) between the etched and un-etched regions. 8.5 nm Nb2O5 and 49 nm SiO2 thin films were deposited by magnetron sputtering as index-matching layers between an ITO electrode and a glass substrate. In case of 30 nm ...
متن کاملDisposable Screen Printed Electrochemical Sensors: Tools for Environmental Monitoring
Screen printing technology is a widely used technique for the fabrication of electrochemical sensors. This methodology is likely to underpin the progressive drive towards miniaturized, sensitive and portable devices, and has already established its route from "lab-to-market" for a plethora of sensors. The application of these sensors for analysis of environmental samples has been the major focu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2015
ISSN: 1424-8220
DOI: 10.3390/s151229846