Displacements and Stresses Produced around a Cylindrical Bore by the Loads Moving with Supersonic Speed
نویسندگان
چکیده
منابع مشابه
Experimental Investigations of Supersonic Flow around a Long Axisymmetric Body
A series of supersonic wind tunnel tests on an ogive-cylinder body were performed to investigate the pressure distribution, the boundary layer profiles, and the flow visualization at various angles of attack. All tests were conducted in the trisonic wind tunnel of the Imam Hossein University. The theoretical shock angle at different model positions compared well with those we obtained via Schi...
متن کاملStresses Produced in an Infinite Elastic Plate by the Application of Loads Travelling with Uniform Velocity Along the Bounding Surfaces
Using Fourier integrals, a quasi-steady solution is obtained to the title problem where the direction of motion, shape and size of the loading distribution do not vary with time. The loads are, moreover, assumed equally applied to both surfaces in such a way that the motion takes place in two dimensions. A numerical example is considered where the applied loading is distributed discontinuously ...
متن کاملAnalysis of a Beam under Moving Loads
Abstract: It is assumed that a beam made of material has a physical nonlinear behavior. This beam is analyzed under the moving concentrated and distributed continuous loads. The vibration equations of motion are derived from the Hamilton's Principle and Euler–Lagrange Equation. In this study, the amplitude of vibration, circular frequency, bending moment, stress and deflection of the beam has b...
متن کاملExperimental Investigations of Supersonic Flow around a Long Axisymmetric Body
A series of supersonic wind tunnel tests on an ogive-cylinder body were performed to investigate the pressure distribution, the boundary layer profiles, and the flow visualization at various angles of attack. All tests were conducted in the trisonic wind tunnel of the Imam Hossein University. The theoretical shock angle at different model positions compared well with those we obtained via Schi...
متن کاملResolving Loads with Positive Interior Stresses ( Extended
If the load F produces a linear or angular momentum it cannot be resolved by any framework. Therefore we restrict ourselves to loads with ∑ pi fi = 0 and ∑ pi 〈pi , fi〉 = 0. (The vector pi denotes pi rotated by 90 degrees.) If a framework can resolve any load it is called statically rigid. Static rigidity is an equivalent condition for infinitesimal rigidity (see [3]). In general a statically r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1972
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.38.231