Dispersion measurement of microstructured negative curvature hollow core fiber
نویسندگان
چکیده
منابع مشابه
Spectral attenuation limits of silica hollow core negative curvature fiber.
In this paper we discuss the limits of attenuation of silica hollow core negative curvature fibers in the wavelength range from 800 nm up to 4.5 µm. Both numerical and experimental results are presented and show good agreement. A minimum attenuation of 24.4 dB/km was measured at around 2400 nm wavelength, while 85 dB/km was measured at 4000 nm.
متن کاملHollow-core microstructured polymer optical fiber.
We have fabricated microstructured polymer optical fibers that guide light in a hollow core using the photonic bandgap mechanism. The hollow core allows the use of polymer fibers to be extended to wavelength ranges where material absorption typically prohibits their use, with attenuation lower than the material loss observed in the infrared. The fabrication method is similar to other microstruc...
متن کاملLiquid-filled hollow core microstructured polymer optical fiber.
Guidance in a liquid core is possible with microstructured optical fibers, opening up many possibilities for chemical and biochemical fiber-optic sensing. In this work we demonstrate how the bandgaps of a hollow core microstructured polymer optical fiber scale with the refractive index of liquid introduced into the holes of the microstructure. Such a fiber is then filled with an aqueous solutio...
متن کاملApplication of Negative Curvature Hollow-Core Fiber in an Optical Fiber Sensor Setup for Multiphoton Spectroscopy
In this paper, an application of negative curvature hollow core fiber (NCHCF) in an all-fiber, multiphoton fluorescence sensor setup is presented. The dispersion parameter (D) of this fiber does not exceed the value of 5 ps/nm × km across the optical spectrum of (680-750) nm, making it well suited for the purpose of multiphoton excitation of biological fluorophores. Employing 1.5 m of this fibe...
متن کاملPicosecond and nanosecond pulse delivery through a hollow-core Negative Curvature Fiber for micro-machining applications.
We present high average power picosecond and nanosecond pulse delivery at 1030 nm and 1064 nm wavelengths respectively through a novel hollow-core Negative Curvature Fiber (NCF) for high-precision micro-machining applications. Picosecond pulses with an average power above 36 W and energies of 92 µJ, corresponding to a peak power density of 1.5 TWcm⁻² have been transmitted through the fiber with...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optical Engineering
سال: 2016
ISSN: 0091-3286
DOI: 10.1117/1.oe.55.11.116106