Dispersion kinetics in mechanically agitated vessel
نویسندگان
چکیده
منابع مشابه
Oxygen transfer and mixing in mechanically agitated airlift bioreactors
Gas holdup, mixing, liquid circulation and gas–liquid oxygen transfer were characterized in a large (∼1.5 m3) draft-tube airlift bioreactor agitated with Prochem® hydrofoil impellers placed in the draft-tube. Measurements were made in water and in cellulose fiber slurries that resembled broths of mycelial microfungi. Use of mechanical agitation generally enhanced mixing performance and the oxyg...
متن کاملComputational Flow Modeling of Multiphase Mechanically Agitated Reactors
Mixing and dispersion of solids and gases in liquids in mechanically agitated reactors is involved in about 80% of the operations in the chemical industries, including processes ranging from leaching and complete dissolution of reagents to suspension of catalysts and reaction products, such as precipitates and crystals (Smith, 1990). This is one of the most widely used unit operations because o...
متن کاملKinetics of Propane Hydrate Formation in Agitated Reactor: A Mass Transfer Approach
Understanding the kinetics of gas hydrate formation is essential to model and predict the hydrate formation (or dissociation) process. In the present paper, we investigated the formation of pure propane gas hydrate as a former gas. In this regard, several experiments were conducted to measure the rate of hydrate formation under various pressures (410 to 510 kPa) and temperatures (274 K to 277 K...
متن کاملThermal Behaviour of Forest Biomass Drying in a Mechanically Agitated Fluidized Bed
−− The results obtained in the analysis of the thermal behaviour of a forest biomass fluidized bed dryer with mechanical agitation, are reported. The study is carried out in a pilot size experimental equipment in batch operation. By means of Taguchi’s techniques the specific consumption of energy and the rates of evaporation of water and production of dry biomass are analyzed based on the contr...
متن کاملKinetics of Indium Extraction from Mechanically Activated ITO Scrap
The indium tin oxide scrap (ITOS) was mechanically activated by a stirring ball mill and subsequently studied for the leaching behavior and kinetics of extracting indium from ITOS in hydrochloric acid solution. The X-ray diffraction (XRD) analysis showed that MA caused the decrease in crystalline phase and increase in lattice distortion. The effects of reaction temperature and hydrochloric acid...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Web of Conferences
سال: 2019
ISSN: 2100-014X
DOI: 10.1051/epjconf/201921302008