Dispersed phase hold-up and characteristic velocity in a pulsed packed extraction column

Prediction of Mean Drop Size in Pulsed Packed Extraction Columns

Prediction of Dispersed Phase Holdup in the Kühni Extraction Column Using a New Experimental Correlation and Artificial Neural Network

In this work, the dispersed phase holdup in a Kühni extraction column is predicted using intelligent methods and a new empirical correlation. Intelligent techniques, including multilayer perceptron and radial basis functions network are used in the prediction of the dispersed phase holdup. To design the network structure and train and test the networks, 174 sets of experimental data are used. T...

Prediction of Dispersed Phase Holdup in Scheibel Extraction Columns by a New Correlation

In this study, the effect of operating parameters on dispersed phase holdup in liquid-liquid extraction process has been investigated. Three chemical systems (Toluene/Water, Butyl acetate/Water, and n-Butanol/Water) were utilized and holdup was considered in a wide range of interfacial tensions through a Scheibel extraction column. Various rotor speeds were examined on the certain velocities of...

Heat Transfer in a Column Packed With Spheres

The purpose of the study is to investigate average and local surface heat transfer coefficients in a cylinder packed with spheres. Here the term «local» applies to a single sphere within the bed. Averages are derived from the sixteen different spheres that were instrumented and distributed throughout the bed. The experimental technique consisted of introducing a step - wise change in the temper...

Investigation of Effective Parameters on Phase Inversion Hold-up in Continuous Mixer-settler

In this paper, we studied effect of different parameters including density, viscosity, interfacial tension and solute transfer concentration on phase inversion hold-up. The results showed that change in phase density ratio had no effect on phase inversion hold-up. It also disclosed that the phase viscosity ratio was the most effective parameter affecting phase inversion hold-up and each phase h...