Disintegration of Fe-Al Alloy

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Phase Separation kinetics in Fe-Cr-Al alloy

9 The α α phase separation kinetics in a commercial Fe-20 wt% Cr-6% Al oxide dispersion-strengthened PM 1

متن کامل

Modification of Primary Si Crystals and Fe-rich Intermetallics in LM28 Al Alloy Fabricated Through Thixoforming

In the present research, thixoforming route was carried out in order to enhance the microstructural features of LM28 piston alloy. Typical microstructure of this alloy was composed of coarse, polygonal primary silicon particles, eutectic matrix and intermetallic phases. Thermal analysis was carried out to study the solidification path of the base alloy and determine the major arrest temperature...

متن کامل

Nanostructurization of Fe-Ni Alloy

Data about an effect of cyclic γ-α-γ martensitic transformations on the structure state of reverted austenite Fe-31.7 wt.% Ni-0.06 wt.% C alloy are presented. The effect of multiple direct γ-α and reverse α-γ martensitic transformations on fragmentation of austenitic grains has been investigated by electron microscopy and X-ray diffraction methods. An ultrafine structure has been formed by nano...

متن کامل

In situ quantification of the nucleation and growth of Fe-rich intermetallics during Al alloy solidification

Real-time in situ synchrotron X-ray tomographic microscopy was used to gain new insights into and quantify the nucleation mechanisms and growth kinetics of b-Al5FeSi intermetallics during solidification of an aluminium Al–7.5Si–3.5Cu–0.6Fe (wt.%) alloy. Three new insights were obtained. First, the plate-like b-intermetallics appeared to nucleate mainly on or near the primary aluminium dendrites...

متن کامل

Effect of Al Addition on Microstructure and Physical Properties of Fe-36Ni Invar Alloy

High strength Fe-36Ni-base Invar alloys containing Al contents up to 0.3 weight percent were cast into ingots and thermodynamic equilibrium during solidification has been investigated in this study. From the thermodynamic simulation using Thermo-Calc®, it has been revealed that equilibrium phases which can be formed are two kinds of MC-type precipitates, MoC, and M2C carbides. The mu phase was ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of the Japan Institute of Metals and Materials

سال: 1960

ISSN: 0021-4876,1880-6880

DOI: 10.2320/jinstmet1952.24.11_732