DISCUSSION ON ESTIMATION METHODS OF PILE HEAD RIGIDITY FOR SIMPLIFIED SEMI-RIGID PILE HEAD CONNECTION

simplified method for settlement prediction of single pile and pile group using a hyperbolic model

a simplified approach for nonlinear analysis of the load-displacement response of a single pile and a pile group is presented using the load-transfer approach. a hyperbolic model is used to capture the relationship between unit skin friction and pile-soil relative displacement developed at the pile-soil interface and the load-displacement relationship developed at the pile end. as to the nonlin...

Critical assessment of pile modulus determination methods

The elastic modulus of a concrete pile is an important parameter for the interpretation of load test results. This paper summarizes and assesses the methods available for its determination. Ten methods have been identified of which four are based on laboratory tests and the remainder on in situ pile instrumentation. Six of the methods have been used to interpret the modulus of a concrete pile s...

Analysis of Centrifuge Pile Tests; Simulation of Pile-driving

The Effect of a Transient Dynamic Loaded Pile on a Neihbouring Pile for Nonhomogeneous Soils

ABSTRACT This study presents an investigation of the interaction effect of one loaded pile on a neighboring pile under transient dynamic loadings. Analyses are carried for non homogeneous soils. The hybrid boundary element formulation is used to represent boundary integral representation of soil domain and pile equations represented by linear structural components. The formulation is presented ...

Effect of Passive Pile on 3D Ground Deformation and on Active Pile Response

Using a series of model tests, this study investigated the effect of a passive pile on 3D ground deformation around a laterally loaded pile and on that laterally loaded pile's response in sand. The active pile head was subjected to lateral loads, and the passive pile was arranged in front of the active pile. In the model tests, the distance between the two pile centers was set to zero (i.e., a ...