Discussion: “Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part 1—Theoretical Formulation” (Hamrock, B. J., and Dowson, D., 1976, ASME J. Lubr. Technol., 98, pp. 223–228)
نویسندگان
چکیده
منابع مشابه
An Arbitrary Lagrangian–Eulerian Formulation for Modelling Cavitation in the Elastohydrodynamic Lubrication of Line Contacts
In this article an arbitrary Lagrangian–Eulerian (ALE) formulation for modelling cavitation in elastohydrodynamic lubrication (EHL) is derived and applied to line contact geometry. The method is developed in order to locate the position of cavitation onset along the length of the contacting region which gives the transition from liquid to vapour in the fluid. The ALE is implemented by introduci...
متن کاملElastohydrodynamic Grease Lubrication Theory and Numerical Solution in Line Contacts
In this paper, film thickness and pressure distribution of EHL in line contacts for four kinds of greases and one type of oil are calculated under a series of rolling velocities by wing an inverse solution method. The Herschel-Bulkley model is wed for the rheological characteristics of the grease. Based on the theoretical analysis and numerical calculation, the following influences on film thic...
متن کاملElastohydrodynamic lubrication of faults
The heat flow paradox provides evidence that a dynamic weakening mechanism may be important in understanding fault friction and rupture. We present here a specific model for dynamic velocity weakening that uses the mechanics of well-studied industrial bearings to explain fault zone processes. An elevated fluid pressure is generated in a thin film of viscous fluid that is sheared between nearly ...
متن کاملHydrodynamic and Elastohydrodynamic Lubrication
Contents 1. Introduction 2. Stress-induced lubricant degradation 3. Basic equations governing the fluid elastohydrodynamic lubrication (EHL) of line and point contacts 3.1. Equations of fluid motion 3.2. Contact surface displacements in line and point lubricated contacts 4. Steady isothermal EHL problems for lightly loaded non-conformal line contacts 5. Steady isothermal EHL problems for heavil...
متن کاملDiscussion: “Temperature of Food and Drink Intake Matters” (Wong, K. V., 2016, ASME J. Energy Resour. Technol., 138(5), p. 054701)
Wong’s article seeks to model the energy balance of humans inclusive of both sensible and oxidative energy content of food with the objective of finding means to modify the human energy balance and reduce obesity [1]. The author proposes that the temperature at which foods and beverages are consumed can make a significant contribution to whole body energy balance, and the temperature of foodstu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Lubrication Technology
سال: 1976
ISSN: 0022-2305
DOI: 10.1115/1.3452802