Discretization approaches to model orthogonal cutting with Lagrangian, Arbitrary Lagrangian Eulerian, Particle Finite Element method and Smooth Particle Hydrodynamics formulations
نویسندگان
چکیده
منابع مشابه
finite element simulation of c.v. joint forging of prid using arbitrary lagrangian-eulerian method
one of the most important parts of power transmission in automotives is c.v. joint, which consists of four components where exterior bowl is one of them. due to its complexity, and importance in automobile and existence of high stresses, forging process is the only cost effective method of production. hence, the best method of production of this part is forging process. the exterior part of c.v...
متن کاملDynamic Fracture Analysis Using an Uncoupled Arbitrary Lagrangian Eulerian Finite Element Formulation
This paper deals with the implementation of an efficient Arbitrary Lagrangian Eulerian (ALE) formulation for the three dimensional finite element modeling of mode I self-similar dynamic fracture process. Contrary to the remeshing technique, the presented algorithm can continuously advance the crack with the one mesh topology. The uncoupled approach is employed to treat the equations. So, each t...
متن کاملApplication of an Arbitrary Lagrangian Eulerian Method to Describe High Velocity Gas-Particle Flow Behavior
Novel computational and small-scale experimental investigations were performed in order to better understand the high velocity flow behavior of gas-particle mixtures. The motion of solid objects impacted by the flow of the mixtures was measured by use of high-speed digital video photography. Computations were performed by use of an arbitrary Lagrangian Eulerian (ALE) treatment in a nonlinear fi...
متن کاملInfluence of Water Cooling on Orthogonal Cutting Process of Ti-6Al-4V Using Smooth-Particle Hydrodynamics Method
Temperature control during the cutting process with different parameters such as cutting velocity and applying water cooling is essential to decrease the cutting force, increase the life of the cutting tool and decrease the machined surface temperature of work-piece. In this research, the temperature of machined surface and the chip-tool interface in orthogonal cutting process of Ti-6Al-4V were...
متن کاملArbitrary Lagrangian-Eulerian finite-element method for computation of two-phase flows with soluble surfactants
Article history: Received 20 September 2010 Received in revised form 3 January 2012 Accepted 13 January 2012 Available online 1 February 2012
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2020
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.03.139