Discrete element modeling of acoustic emission in rock fracture
نویسندگان
چکیده
منابع مشابه
Discrete element modeling of explosion-induced fracture extension in jointed rock masses
The explosion process of explosives in a borehole applies a very high pressure on its surrounding rock media. This process can initiate and propagate rock fractures, and finally, may result in the rock fragmentation. Rock fragmentation is mainly caused by the propagation of inherent pre-existing fractures of the rock mass and also from the extension of the newly formed cracks within the intact ...
متن کاملAcoustic Emissions Produced by Discrete Fracture in Rock
An experimental programme was undertaken to develop a servo-controlled loading and high-fidelity data acquisition system to ~westigate acoustic emission (AE) waveforms produced during discrete fracture propagation in rock. Large (0.3 × 0.3 × I m) chevron-notched specimens were loaded in controlled conditions, and characteristic acoustic emissions associated with Mode I and Mode l l fracture wer...
متن کاملDiscrete element modeling of a mining-induced rock slide
Slopes are subjected to stress redistributions during underground mining activities, and this may eventually cause deformation or landslide. This paper takes Madaling landslide in Guizhou Province, China as a case study to investigate the failure mechanism and its run-out behaviours by using discrete element method. Previous qualitative analysis indicated that the slope experienced four stages ...
متن کاملFinite Element and Plate Theory Modeling of Acoustic Emission Waveforms
A comparison was made between two approaches to predict acoustic emission waveforms in thin plates. A normal mode solution method for Mindlin plate theory was used to predict the response of the flexural plate mode to a point source, step-function load, applied on the plate surface. The second approach used a dynamic finite element method to model the problem using equations of motion based on ...
متن کاملRock Slope Stability Analysis Using Discrete Element Method
Rock slope stability depends very much on the strength features of the rock and the geometrical and strength characteristics of the discontinuities (e.g., roughness, wall strength and persistence). Since a rock mass is not a continuum, its behavior is dominated by such discontinuities as faults, joints and bedding planes. Also, Rock slope instability is a major hazard for human activities and o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Theoretical and Applied Mechanics Letters
سال: 2013
ISSN: 2095-0349
DOI: 10.1063/2.1302109