Discontinuous Precipitation of α-Cr Phase in Alloy 33 (Cr-Fe-Ni-N)

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Phase Separation kinetics in Fe-Cr-Al alloy

9 The α α phase separation kinetics in a commercial Fe-20 wt% Cr-6% Al oxide dispersion-strengthened PM 1

متن کامل

Vibrational properties of alpha- and sigma-phase Fe-Cr alloy.

Experimental and theoretical studies, of the Fe-partial phonon density of states (PDOS) for Fe52.5Cr47.5 alloy having alpha and sigma phases were carried out. The former using the nuclear resonant inelastic x-ray scattering method, and the latter with the direct one. Characteristic features of PDOS, which distinguish one phase from the other, were revealed and successfully reproduced by the the...

متن کامل

Investigations of Surface Dissolution on Fatigue Crack Nucleation in Ni - 22 Cr - 2 Fe Alloy

Ni-Cr-Fe alloy specimens were fatigued in a hydrochloric acid solution cell at pH 5.6 ±0.1. Results show that the number of surface slip bands forming, extending, and widening increased with the number of cycles. Results also indicated that, initially, cracks initiated as transgranular features but took on intergranular forms as the number of cycles increased.

متن کامل

Thermally activated growth of lath martensite in Fe- Cr-Ni-Al precipitation hardenable stainless steel

The austenite-to-martensite transformation in a partially hardened stainless steel containing 17wt %Cr, 7wt %Ni and 1wt % Al was investigated with Vibrating Sample Magnetometry and Electron Back-Scatter Diffraction. Magnetometry demonstrated that measurable martensite formation can be suppressed on fast cooling to 77K as well as on subsequent fast heating to 373 K. Surprisingly, martensite form...

متن کامل

Dynamic compression of an Fe–Cr–Ni alloy to 80 GPa

Wave profiles were measured in an Fe–Cr–Ni alloy ~stainless steel 304! shock compressed to Hugoniot stresses between 7 and 80 GPa. A single-stage propellant gun was used to generate shock states and time histories were recorded by velocity interferometry. The particle velocity measurements are generally consistent with impedance match calculations to 62%. Unloading wave velocities were obtained...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Microscopy and Microanalysis

سال: 2019

ISSN: 1431-9276,1435-8115

DOI: 10.1017/s1431927619013989