Discontinuous precipitation in Mg-Al alloy studied in 3-dimensions
نویسندگان
چکیده
Discontinuous precipitation (DP) is a commonly observed mechanism by which solid solutions decompose. It results from layers of precipitate and solute depleted matrix forming across moving boundary. The morphology the discontinuous regions can be highly complex, way dislocations or twins navigate such structure during deformation poorly understood. Only through 3-dimensional (3D) analysis true revealed. This work presents first 3D study DP using novel PFIB based serial sectioning method. material studied AZ80, an industrially important class Mg-Al-Zn alloy where observed. revealed to consist interconnected network within matrix. width show strong local variations. expected readily penetrated dislocations.
منابع مشابه
FRACTIONAL RECRYSTALLIZATION KINETICS IN DIRECTLY COLD ROLLED Al-Mg, Al-Mg-Sc AND Al-Mg-Sc-Zr ALLOY
The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were ...
متن کاملDsc Study of Precipitation in an Al-mg-mn Alloy Microalloyed with Cu
Power compensation DSC has been employed to detect and analyse precipitation reactions in an Al1.3Mg-0.4Mn and an Al-1.3Mg-0.4Mn-0.07Cu alloy in which very small amounts of precipitate, less than 0.3 at%, are expected to form. Due to the very small heat effects, baseline instability and drift significantly interfere with the measurements. After repeated experiments and careful baseline correcti...
متن کاملAmplitude Dependent Internal Friction in a Mg-Al-Zn Alloy Studied after Thermal and Mechanical Treatment
Zuzanka Trojanová 1,*, Pavel Lukáč 1, Ján Džugan 2 ID and Kristýna Halmešová 2 1 Department of Physics of Materials, Faculty of Mathematics and Physics, Charles University, Ke Karlovu 5, 121 16 Praha 2, Czech Republic; [email protected] 2 COMTES FHT, Průmyslová 996, 334 41 Dobřany, Czech Republic; [email protected] (J.D.); [email protected] (K.H.) * Correspondence: ztrojan@...
متن کاملTHERMAL ANALYSIS AND KINETICS OF THE PRECIPITATION IN WROUGHT Al-Mg, Al-Mg-ScAND Al-Mg-Sc-Me (Me=Zr, Ti) ALLOYS
Precipitation behaviour of wrought Al-6Mg alloys with ternary scandium and quaternary zirconium and titanium has been studied. Hardness measurements and resistivity studies are employed to assess the precipitation behaviour of scandium doped Al-6Mg alloy without or with quaternary additions of zirconium and titanium. Further, the kinetics of precipitations are studied by differential scanning c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scripta Materialia
سال: 2023
ISSN: ['1359-6462', '1872-8456']
DOI: https://doi.org/10.1016/j.scriptamat.2022.115265