Directly writing binary multi-sector phase plates on fused silica using femtosecond laser
نویسندگان
چکیده
منابع مشابه
Femtosecond laser micromachining of fused silica molds.
The use of low-energy femtosecond laser beam combined with chemical etching has been proven to be an efficient method to fabricate three-dimensional structures in fused silica. For high-volume application, this technology--like other serial processes--suffers from a moderate production rate. Here, we show that femtosecond laser can also be employed to fabricate silica molds and other patterned ...
متن کاملFemtosecond laser modification of fused silica: the effect of writing polarization on Si-O ring structure.
A femtosecond laser with a 1 kHz repetition rate and two different polarization states was used to fabricate low-loss waveguides in fused silica. Investigations of chemically-mechanically polished waveguide regions using near-field scanning optical microscopy revealed the presence of modifications outside the glass regions directly exposed to a circularly polarized writing laser. These waveguid...
متن کاملWaveguide electro-optic modulator in fused silica fabricated by femtosecond laser direct writing and thermal poling.
An integrated electro-optic waveguide modulator is demonstrated in bulk fused silica. A Mach-Zehnder interferometer waveguide structure is fabricated by direct writing with a femtosecond laser followed by thermal poling. A 20 degrees electro-optic phase shift is achieved at an operating wavelength of 1.55 microm with an applied voltage of 400 V and an interaction length of 25.6 mm, which corres...
متن کاملDirect welding of fused silica with femtosecond fiber laser
Development of techniques for joining and welding materials on a micrometer scale is of great importance in a number of applications, including life science, sensing, optoelectronics and MEMS packaging. In this paper, methods of welding and sealing optically transparent materials using a femtosecond fiber laser (1 MHz & 1 μm) were demonstrated which overcome the limit of small area welding of o...
متن کاملStructural Modification of Amorphous Fused Silica under Femtosecond Laser Irradiation
Non-linear absorption of femtosecond laser pulses enables the induction of structural changes in the interior of bulk transparent materials without affecting their surface. This property can be exploited for the transmission welding of transparent dielectrics, three dimensional optical data storages and waveguides. In the present study, femtosecond laser pulses were tightly focused within the i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: High Power Laser Science and Engineering
سال: 2018
ISSN: 2095-4719,2052-3289
DOI: 10.1017/hpl.2018.1