Direct Transition Phenomena in Pool Boiling of FC-72

Infrared thermometry study of nanofluid pool boiling phenomena

Infrared thermometry was used to obtain first-of-a-kind, time- and space-resolved data for pool boiling phenomena in water-based nanofluids with diamond and silica nanoparticles at low concentration (<0.1 vol.%). In addition to macroscopic parameters like the average heat transfer coefficient and critical heat flux [CHF] value, more fundamental parameters such as the bubble departure diameter a...

Direct Numerical Simulation of Subcooled Nucleate Pool Boiling

With the long-term objective of Critical Heat Flux (CHF) prediction, a Direct Numerical Simulation (DNS) framework for simulation of subcooled and saturated nucleate pool boiling is developed. One case of saturated, and three cases of subcooled boiling at different subcooling levels are simulated. Grid refinement study is also reported. Both boiling and condensation phenomena can be computed si...

Pool Boiling Heat Transfer in Water/Amines Solutions

In this investigation, nucleate boiling heat transfer coefficients were experimentally measured during pool boiling of mixtures, consisting of water/monoethanolamine and water/diethanolamine on a horizontal heating rod, under atmospheric pressure. The experiment was carried out below 205 kW.m-2 heat flux, over a wide range of concentrations. These experiments include, measurement of pool boilin...

Flow boiling of FC-72 from a screen laminate extended surface matrix

An investigation is conducted to assess the thermal performance of multi-layered screen laminates when used as extended surface matrices (ESM’s) in vertical up-flow boiling. A dielectric coolant (FC-72) is used as the working fluid. Four specimens are constructed having different mesh-geometries and/or number of layers. Channel Reynolds numbers are varied from 2700 to 8500 and ESM base superhea...

Secondary pool boiling effects