Direct Strength Method for calculating distortional buckling capacity of cold-formed thin-walled steel columns with uniform and non-uniform elevated temperatures

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Local, Distortional, and Euler Buckling of Thin-Walled Columns

Open cross-section, thin-walled, cold-formed steel columns have at least three competing buckling modes: local, distortional, and Euler ~i.e., flexural or flexural-torsional! buckling. Closed-form prediction of the buckling stress in the local mode, including interaction of the connected elements, and the distortional mode, including consideration of the elastic and geometric stiffness at the w...

متن کامل

Local and Distortional Buckling of Cold-Formed Steel Members

Laminar structures have a high post-buckling strength reserve. Cold-formed steel profiles can be taken as a set of thin plate elements. Therefore it is necessary to design this type of profiles taking into account that reserve of strength in post-local buckling modes of failure. The method normally used to design this type of structures is based on the Effective Width concept. The Effective Wid...

متن کامل

Strength Design Curves for Thin-Walled Sections Undergoing Distortional Buckling

Certain types of cold-formed sections, notably those composed of high-strength steel, some decking sections and racking sections may undergo a mode of buckling called distortional in which edge and intermediate stiffeners are inadequate to prevent lateral movement of the flanges which they support. The existing design methods in current standards and specifications are often not adequate to acc...

متن کامل

Distortional Buckling Tests on Cold-Formed Steel Beams

Failure in cold-formed steel beams is generally initiated by one of three instabilities: local, distortional, or lateral-torsional buckling. For cold-formed steel joists, purlins, or girts, when the compression flange is not restrained by attachment to sheathing or paneling, distortional buckling may be the predominant failure mode. Experimental results on cold-formed steel beams with unrestrai...

متن کامل

Comparative Study on Distortional Buckling Strength of Cold-Formed Steel Lipped Channel Sections

Usage of cold formed steel structural components for buildings and structures is gaining popularity in India for a decade. Hot rolled steel member behaviour and design are well developed, whereas the cold formed steel member behaviour and design is not developed fully compared to the rest of the world. The Indian code for cold-formed steel design, IS 801 was revised during 1975, which is in lin...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Thin-Walled Structures

سال: 2012

ISSN: 0263-8231

DOI: 10.1016/j.tws.2012.01.006