Direct Laser Forming of Titanium Alloy Powders for Medical and Aerospace Applications
نویسندگان
چکیده
منابع مشابه
[Article] Numerical modeling and testing of mechanical behavior of AM Titanium alloy bracket for aerospace applications
During their operation, modern aircraft engine components are subjected to increasingly demanding operating conditions, especially the high pressure turbine (HPT) blades. Such conditions cause these parts to undergo different types of time-dependent degradation, one of which is creep. A model using the finite element method (FEM) was developed, in order to be able to predict the creep behaviour...
متن کاملArgon-shielded hot pressing of titanium alloy (Ti6Al4V) powders.
The paper presents the method of the argon - shielded hot pressing of titanium alloy (Ti6A14V) powder (used in medical industry). The powders produced in the GA (gas atomization) process and in the HDH (hydride - dehydride) process were used in the experiments. A pressing process was conducted at a temperature of 800-850 degrees C for different lengths of time. An unoxidized sintered material, ...
متن کاملMachinability evaluation of Titanium alloy in Laser Assisted Turning
The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...
متن کاملMachinability evaluation of Titanium alloy in Laser Assisted Turning
The use of titanium and its alloys has increased in various industries recently, because of their superior properties of these alloys. Titanium alloys are generally classified as difficult to machine materials because of their thermo-mechanical properties such as high strength-to-weight ratio and low thermal conductivity. Laser Assisted Machining (LAM) improves the machinability of high strengt...
متن کاملShot Peening of a Titanium Alloy for Medical Implant Applications with Ziirconia Shot
Shot peening with steel shot followed by a cleaning process with glass beads is commonly used as surface finish in the production of modular hip endoprostheses. The induced compressive residual stresses increase the resistance against fatigue and fretting fatigue. The surface roughness can be adjusted in a range that enhances the physiological acceptance I compatibility of monolithic ~rnplants....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KONA Powder and Particle Journal
سال: 2015
ISSN: 0288-4534,2187-5537
DOI: 10.14356/kona.2015017